LevelOne IES-1020 IES1020 Leaflet

LevelOne IES-1020 Industry Ethernet Switch provides 8 PoE ports 

10/100Base plus 2 port Gigabit Combo SFP to enable high speed 

network at mission-critical environment. With the 1U height 

rack-mountable size, this switch can be easily installed in the cabinet, 

plus the clearly visible status LEDs provide simple monitoring of port link 

activity. Moreover, the SFP slots support pluggable modules that 

enabling you to choose from a variety of transceivers.

All components are built to withstand harsh environment applications 

without compromise where humidity, temperature variation and even 

shock vibration are concerns, including Electric & Utility, Critical 

Infrastructure, Transportation and Surveillance Security. This device 

operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.

- Provides 8 10/100Base-TX PoE ports and 2 Gigabit/SFP ports

- 4096 MAC addresses 

- 2.25M bits buffer memory 

- PoE ports can support the IEEE 802.3at standard and power up 30W 

   devices 

- -40°C to 75°C (-40°F to 167°F) operating temperature range 

- 1000 Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, 

   Auto-Negotiation, Auto-MDI/MDIX 

- Alarms for power failure by relay output 

- Supports Rack Mounting installation 

- Complies with NEMA TS2 Environmental requirements for Traffic 

   control equipment

- Complies with IEC61000-6-2 EMC Generic standard immunity for 

   Industrial environment

- UL508

This device has been tested under UL508 standard for Industrial Control 

Equipment to endurance under test turn on and off 6,000 times while 

loaded, with no single failure; also with NEMA (National Manufacturers 

Association) TS2 Environmental certified for the Traffic Control 

Equipment that withstand extreme temperatures, operating voltage and 

humidity fluctuation, vibration and shock commonly experienced in 

severe outdoor environments. 

This redundant power system is designed to meet the challenge of 

power failure to ensure reliability and constant availability. Single power 

design works fine in non-critical network applications, but it falls short 

drastically for network applications in transportation, automate 

production or banking.

This switch is Power Sourcing Equipment (PSE), and it is fully complied 

with IEEE 802.3at PoE standard at maximum 30W power budget per 

port. It helps to save infrastructure wiring costs dramatically by 

eliminating electric wiring and less UPS needed. Also, it is compatible 

with IEEE802.3af standard PD devices.

This unmanaged Industrial Ethernet Switch is designed for the 

demanding industrial environments at businesses in need of instant 

connectivity with no setup or configure required, truly plug and play.

Unit: mm

Side

Top

Back

Front

205

442

44