Dynamode 16-Port Gigabit Rackmount Switch SWG160010-R Leaflet

16 x 10/100/1000Mbps Auto-negotiation 
Gigabit Ethernet ports .
Auto MDI/MDI-X for each port .
Support Full/Half duplex transfer mode for 
10/100Mbps.
Support Full duplex transfer mode for 
1000Mbps .
Wire speed reception and transmission .
Store-and-Forward switching method.
Integrated address Look-Up Engine, 
supports 8K absolute MAC addresses.
Supports 128kByte RAM for data buffering.
Extensive front-panel diagnostic LEDs.
IEEE 802.3x flow control for full-duplex.

Network Media 

2-pair UTP Cat. 3,4,5, up to 100M 
Fast Ethernet: 2-pair UTP Cat. 5, up to 100M 
Gigabit Ethernet: 4-pair UTP Cat. 5, up to 100M   

Protocol 

Number of Ports 

16 x 10/100/1000Mbps auto-MDI/MDI-X port with
 RJ-45 connector 

Network Data Transfer Rate 

Ethernet: 10Mbps (Half-duplex), 20Mbps (Full-duplex),
Fast Ethernet: 100Mbps (Half-duplex), 200Mbps 
(Full-duplex),
Gigabit Ethernet: 2000Mbps (Full-duplex).

Data RAM Buffers 

128kByte 

Filtering Address Table

8K entries per device 

Diagnostic LEDs 

Per Unit: Power 
Per Port: 3 LEDs Link/ACT, 1000M , 100M  

Power 

100 ~ 240VAC 50/60Hz, Internal Universal 
Switching Power 

Power Consumption 

40 watts. (max.) 

Dimensions (WxDxH) 

440 x 210 x 44 mm 

Temperature

Operating: 0 ~ 40C
Storage: -10 ~ 70C  

Humidity

Operating: 10% ~ 90% RH 
Storage: 5% ~ 90% RH 

Standards

IEEE 802.3 10BASE-T 
IEEE 802.3u 100BASE-TX 
IEEE 802.3ab 1000BASE-T 

Topology 

Star

CSMA/CD 

Emission

FCC Class A
CE mark Class A 
VCCI-A