IMC Networks iMcV-Giga-FiberLinX-II, TX/SSLX-SM1550/PLUS-SC (1550xmt/1310rcv) 856-14876 User Manual
Product codes
856-14876
SNMP Management Made Easy
GUI-Interface of iView² for iMcV-Giga-FiberLinX-II
FiberLinX modules features an SNMP management agent for monitoring the status and activity on copper and fiber
ports at the remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application,
Telnet/TFTP, or local serial connection.
ports at the remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application,
Telnet/TFTP, or local serial connection.
• Enable features and change configuration settings from central office.
• Remote upgrades via Telnet/TFTP, serial port or mgt. software.
• Monitor both units and the fiber in between.
• Receive real-time monitoring and statistics.
• Create a secure management domain to isolate management
• Remote upgrades via Telnet/TFTP, serial port or mgt. software.
• Monitor both units and the fiber in between.
• Receive real-time monitoring and statistics.
• Create a secure management domain to isolate management
domain broadcasts from TX Data ports on both units.
• User-definable unit/port descriptions and information.
• Preserves complete end-to-end fiber con-
nection integrity
• Monitors far-end (remote) status without a
physical presence or separate connection
• Maintains security; all management traffic
remains isolated from the remote network
• Includes GUI-based iView² software
• SNMP V1 and V2c compatible
• Read/write IEEE 802.1Q VLAN-tags
• Remote management and upgrades
• QoS– IEEE 802.1p-based packet prioritiza-
• SNMP V1 and V2c compatible
• Read/write IEEE 802.1Q VLAN-tags
• Remote management and upgrades
• QoS– IEEE 802.1p-based packet prioritiza-
tion (2 queues [high/low] with 8 levels of
priority)
priority)
• Layer 2 packet switching, store and forward
operation
• Q-in-Q (extra-tagging)
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports Telnet
• Includes loopback test modes
• AutoCross for MDI-II/MDI-X
• Includes LinkLoss and FiberAlert
• Features Auto-Negotiation and Selective
• IEEE 802.3x Flow Control
• Includes DHCP and TFTP clients
• Supports Telnet
• Includes loopback test modes
• AutoCross for MDI-II/MDI-X
• Includes LinkLoss and FiberAlert
• Features Auto-Negotiation and Selective
Advertising
• Installs in iMediaChassis, iMediaCenter
chassis or MediaChassis (Requires two
slots)
slots)
• Supports the Unified Management Agent
(UMA)
• 50/125µm or 62.5/125µm multi-mode fiber
• 9/125µm single-mode fiber
• Available for single-strand fiber
• Serial Port for management
• Supports Full-Duplex operation
• Includes diagnostic LEDs
• Hot-swappable architecture
• IEEE 802.3 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3ab 1000Base-T twisted pair
• IEEE 802.3z 100Base-LX or SX fiber
• Includes DB-9 connector and cable for
• Available for single-strand fiber
• Serial Port for management
• Supports Full-Duplex operation
• Includes diagnostic LEDs
• Hot-swappable architecture
• IEEE 802.3 10Base-T twisted pair
• IEEE 802.3u 100Base-TX twisted pair
• IEEE 802.3ab 1000Base-T twisted pair
• IEEE 802.3z 100Base-LX or SX fiber
• Includes DB-9 connector and cable for
serial configuration
•
Forwarding rate:
14,880pps for 10 Mbps;
148,800pps for 100 Mbps;
1,488,000pps for 1000 Mbps
148,800pps for 100 Mbps;
1,488,000pps for 1000 Mbps
•
MTU:
Supports over-sized packets up to 9,600
bytes
bytes
•
Connectors:
RJ-45, and ST or SC
Shipping Weight:
.8 lbs (.36 kg)
Regulatory Approvals:
FCC Class B
UL/cUL, CSA, CE
Operating Temperature:
32° to 122°F (0° to +50°C); 5% to 90%
(non-condensing), 0 – 10,000 ft. altitude
(non-condensing), 0 – 10,000 ft. altitude
Storage Temperature:
-13° to +158°F (-25° to +70°C);
5 to 90% (non-condensing)
5 to 90% (non-condensing)
Please refer to the SFP Module datasheet for tech-
nical specifications if using Giga-FiberLinX-II units
with SFP ports.
nical specifications if using Giga-FiberLinX-II units
with SFP ports.
Physical Specifications
Technical Specifications