Ferm BGM1019 Data Sheet
EN
3
BENCH GRINDER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2
Read the operating instructions
carefully before using this device.
Familiarise yourself with its functions
and basic operation. Service the device
as per the instructions to ensure that it
always func tions properly. The
operating instructions and the
accompanying documentation must be
kept in the vicinity of the device.
Contents
1. Machine data
2. Safety instructions
3. Installation
4. Operation
5. Maintenance
1. Machine data
Technical specifications
Voltage
230 V
Frequency
50 Hz
Power input
150 W
Rotational speed, not loaded
2950/min
Duty time
S
2
= 30 min
Grinding wheel dimensions
Ø 150x16 mm
Spindle hole diameter
Ø 12.7 mm
Weight
6.0 kg
Lpa (Sound pressure level) + 3
62.6 dB(A)
Lwa (acoustic power) + 3
75.6 db(A)
Load factor:
A load factor of S2 = 30 min (intermittent
periodic duty) means that you may operate the
motor continuously at its nominal power level
for no longer than the time stipulated on the
specifications label (30 minutes ON period). If
you fail to observe this time limit the motor will
overheat. During the OFF period the motor will
cool again to its starting temperature.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 61029; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
Contents of the package
1 Bench grinder
2 Sets eye shield bracket + eye shield
1 Tool rest (right)
1 Tool rest (left)
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. A
1. On/off switch
2. Tool rest (right)
3. Eye shield
4. Eye shield bracket
5. Screw
6. Tool rest (left)
2. safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.