Apotop DW17 DW-17 Leaflet

Product codes
DW-17
Page of 1
Wi-Reader Pro
For iOS User
    
1. Plug internet cable in the network connector(RJ-45) 
    of Wi-Reader Pro.
2. Switch Wi-Reader Pro to ”      ” (WiFi mode.)
3. Go to Setting – WiFi and select Wi-Reader Pro_xxxxxx
    (6-digit combination) of iDevice(iPad, iPhone, iPod touch).
4. Open the broser of iDevice and 
    go to 10.10.1.1
5. Tap on “Settings” on the up-right 
    of the page.
6. Select “Gateway” and 
   tap on Next.
7. LAN Interface Setup: please tap 
    on Next.
8. WAN Interface Setup:
   a. If get on Internet through internet cable at 
       a hotel room, pleased select the default 
       “DHCP Client” and tap on Next.
b. If get on internet through ADSL modem, 
    please select PPPoE and fill in username/ 
    password provided by ISP(Internet Service 
    provider.) Then tap on Next.
9. Wireless Basic Settings: you can 
    change SSID of Wi-Reader Pro here 
    or tap on Next directly.
10. Wireless Security Setup: you 
      can set the password of WiFi 
      here or tap on Next directly.
11. Complete Setting: please wait for the 
      Wi-Reader Pro reboot. After reboot 
      you may to go to Settings- WiFi and 
      reconnect to Wi-Reader Pro_xxxxxx.
     
12. Enjoy the wireless network.
Super easy-to-use 
wireless card reader
Create a WiFi hotspot in minutes
1. 
Download Wi-Reader App on 
     Apple App Store.
2. 
Plug USB flash drive / SD card, and 
     switch Wi-Reader Pro
 to 
    
 
(WiFi mode)
 
    till the blue led is flickering.
 
3. 
Go to Setting – WiFi and select Wi-Reader 
     Pro_xxxxxx(6-digit combination) of iDevice
     (iPad, iPhone, iPod touch).
4. Tap on Wi-Reader App; you can browse your
    files now. Support file formats: 
    VideoM4V / MP4 / MOV
    MusicMP3 / WAV / AAC
    PictureJPG / BMP / PNG / GIF
    DocumentPDF / DOC / PPT / TXT / HTM/XLS
If they are picture files, you can 
download the files to Photos on 
iPad /iPhone or Collections 
section of Wi-Reader App
Tap on Collections of Wi-Reader 
App; select the files you want to 
upload to SD card / USB flash drive.
You can download selected files 
from SD card/ USB flash drive to 
Collections section of Wi-Reader App.
You can choose to upload from 
Camera Roll; upload pictures tool 
by iPad, iPhone, and iPod touch.
Choose a location you want 
to upload files.
Tap on “Done.” The upload 
progress will start immediately.
6. Upload files
    
For continuous 
usage, please power 
Wi-Reader Pro with 
USB power adapter.
5. Download files
    
iOS
DW17
DW17
Please go to 
www.apotop.com.tw
Product Center for complete User Manual.
Wi-Reader Pro
4. Tap on Wi-Reader Pro App; you can 
    browse your files now. Support 
    file formats: 
    Video
to watch videos in 
                 Wi-Reader Pro App, please 
                 download MX Player or 
                 MoboPlayer on Play Store.
Music
MP3 / WAV / AAC
Picture
JPG / BMP / PNG
Document
For HTC/ Samsung 
                     Android Phone: please 
                     use built-in Polaris office; 
                     other Android Phones 
                     please download OliveOffice
                     on Play Store.
Tap on Collections of Wi-Reader App; 
select the files you want to upload to 
SD card / USB flash drive.
You can download selected files from SD card/ 
USB flash drive to Collections section of 
Wi-Reader Pro App. Tap the icon ”        ” on 
top-right; you can select the files you want
to download. 
Tap on “Upload” from Smartphone.
Tap on the files you want to 
upload; choose a location you 
want to upload the files.
Tap on “Upload.” The upload 
progress will start immediately.
6. Upload files
    
5. Download files
    
DW17
DW17
Android
For Android OS User
Micro-USB port:
for PC as a standard 
   card reader.
for recharging built-in 
    battery.
Reset Button
 
Function switch:
 
for enabling WiFi mode.
for powerbank function.
RJ-45 cable
Support 
SD card 
Support 
USB Flash drive
 
Micro-USB port:
for PC as a standard 
   card reader.
for recharging built-in 
    battery.
Reset Button
 
Function switch:
 
for enabling WiFi mode.
for powerbank function.
RJ-45 cable
Support 
SD card 
Support 
USB Flash drive
 
Super easy-to-use 
wireless card reader
1. 
Download Wi-Reader Pro 
     App on Google Play Store.
2. Plug USB flash drive / 
   SD card, and switch 
   Wi-Reader Pro to ”       ” 
   (WiFi mode) till the blue 
   led is flickering.
3. Go to Setting-WiFi and 
    select Wi-Reader Pro_xxxxxx
    (6-digit combination) of 
    Android Device.
  
8. WAN Interface Setup:
   a. If get on Internet through internet cable at 
       a hotel room, pleased select the default 
       “DHCP Client” and tap on Next.
b. If get on internet through ADSL modem, 
    please select PPPoE and fill in username/ 
    password provided by ISP(Internet Service 
    provider.) Then tap on Next.
9. Wireless Basic Settings: you can 
    change SSID of Wi-Reader Pro here 
    or tap on Next directly.
10. Wireless Security Setup: you 
      can set the password of WiFi 
      here or tap on Next directly.
11. Complete Setting: please wait for the 
      Wi-Reader Pro reboot. After reboot 
      you may to go to Settings- WiFi and 
      reconnect to Wi-Reader Pro_xxxxxx.
     
12. Enjoy the wireless network.
4. Open the broser of Android Device 
    and go to 10.10.1.1
5. Tap on “Settings” on the up-right 
    of the page.
6. Select “Gateway” and 
   tap on Next.
7. LAN Interface Setup: please tap 
    on Next.
Create a WiFi hotspot in minutes
For continuous 
usage, please power 
Wi-Reader Pro with 
USB power adapter.
Please go to 
www.apotop.com.tw
Product Center for complete User Manual.
    
1. Plug internet cable in network 
    connector (RJ-45) of 
    Wi-Reader Pro.
2. Switch Wi-Reader Pro 
     to  ”      ” (WiFi mode.)
3. Go to Wi-Fi Setting and select 
    Wi-Reader Pro_xxxxxx 
    (6-digit combination) of Android 
    Phone/ tablet.
After complete selecting files, please tap the 
icon ”        ”on the top-left. The function menu 
will be shown for Download,Export, Rename, 
Move, or Delete the selected files.
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and 
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.Reorient the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. 
It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and 
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.Reorient the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. 
It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.