Voltcraft USB charger Car CLC-2400S Apple Dock plug lightning 1 x 2400 mA CLC-2400S User Manual

Product codes
CLC-2400S
Page of 4
  
OPERATING INSTRUCTIONS
VERSION 07/13
IN-CAR CHARGER
ITEM NO.: 44 88 80
CLC-4800USB
ITEM NO.: 44 88 81
CLC-2400S
ITEM NO.: 44 88 90
CLC-2000USB
INTENDED USE
The product is suitable for charging and operating apple devices with 8-pole Lightning 
connector. The additional USB port is intended for charging and operating USB devices 
(only applicable for item no. 44 88 80 + 44 88 90). Power is supplied via an on-board voltage 
socket. The product features overload and short circuit protection mechanisms. Use the 
product in dry indoor areas only.  
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If 
you use the product for purposes other than those described above, the product may be 
damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric 
shock etc. Read the instructions carefully and keep them. Make this product available to third 
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company 
names and product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
•  In-car charger
•  Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety 
information. If you do not follow the safety instructions and information 
on proper handling in this manual, we assume no liability for any resulting 
personal injury or damage to property. Such cases will invalidate the 
warranty/guarantee.
a) Persons / Product
•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may become 
dangerous playing material for children.
•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high 
humidity, moisture, flammable gases, vapours and solvents.
•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and 
protect it from any accidental use. Safe operation can no longer be guaranteed if 
the product:
 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.
•  Please handle the product carefully. Jolts, impacts or a fall even from a low height 
can damage the product.
•  Also observe the safety and operating instructions of any other devices which are 
connected to the product.
•  Always turn the connected appliance off before connecting or disconnecting it.
•  Disconnect the in-car charger when not in use.
•  The product gets hot during use. Ensure sufficient ventilation and never cover the 
product during use.
•  Do not short-circuit the outputs.
•  Make sure the cable does not get squeezed, bent or damaged by sharp edges.
•  Never use the product immediately after it has been brought from a cold room 
into a warm one. The condensation generated could destroy the product. A wall 
plug transformer also poses the risk of fatal injury due to electric shock! Allow the 
device to reach room temperature before connecting and using it. This may take 
several hours.
b) Miscellaneous
•  Consult an expert when in doubt about operation, safety or connection of the 
device.
•  Maintenance, modifications and repairs are to be performed exclusively by an 
expert or at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not 
covered by these operating instructions, please do not hesitate to contact our technical 
support or another qualified specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 96 04 / 40 87 80
 Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 96 04 / 40 87 80  
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing 
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Voltcraft®
OPERATION
Always switch off the desired device before connecting it to the respective 
port on the in-car charger. Make sure the connection is correct. If the product 
is not connected properly, it could overheat or cause an electric shock or fire.
Make sure your device matches the power supply data of the in-car charger. 
Observe the information in chapter “Technical data”.
1. When switched off, connect the apple device to the Lightning connector on the in-car 
charger.
2. When switched off, connect the USB device to the USB port on the in-car charger (only 
applicable for item no. 44 88 80 + 44 88 90).
3. Connect the in-car charger to a voltage socket in your car. The power indicator of the in-car 
charger lights up indicating the product is ready for use.
4. The connected appliance(s) will then be charged. If you want to use the connected 
appliance(s) you may now switch it/them on.
5. Switch off the connected device before disconnecting the in-car charger from the vehicle 
voltage socket.
6. Disconnect the in-car charger from the cigarette lighter after use.
You may use the in-car charger with the engine running or off. You should, however, 
not start the engine when the in-car charger is connected, as the vehicle voltage socket 
disconnects during engine start (not necessarily applicable for all vehicle types). If the 
engine is switched off, drawing current over a longer period of time will discharge the 
vehicle battery.
CLEANING
Disconnect the product from the on-board voltage socket before cleaning. Clean the product 
with a dry, fiber-free cloth.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the 
household waste.
At the end of its service life, dispose of the product according to the relevant 
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
TECHNICAL DATA
Input voltage ....................................... 12 V/DC
Output voltage .................................... 5 V/DC
Operating temperature/humidity ......... -10 to +40 ºC, 20 – 90 % RH (non-condensing)
Storage temperature/humidity ............ -20 to +60 ºC, 10 – 90 % RH (non-condensing)
Cable length ....................................... 1 m
Output current ..................................... 2 x 2.4 A (item no. 44 88 80)
............................................................
2.4 A (item no. 44 88 81)
............................................................
2 A total (item no. 44 88 90)
Dimensions (W x H x D) ..................... 25 x 25 x 69 mm (item no. 44 88 80)
............................................................
23 x 25 x 44 mm (item no. 44 88 81 + 44 88 90)
Weight ................................................ 42 g (item no. 44 88 80)
............................................................
26 g (item no. 44 88 81)
............................................................
28 g (item no. 44 88 90)