Lappkabel 00100023, CLASSIC 100 Control Data Cable, 4 x 0.5 mm², Grey Sheath 00100023 Data Sheet
Product codes
00100023
DATA SHEET
0010000
ÖLFLEX
®
CLASSIC 100
valid from :
19.05.2010
Originator: H. Krämer / PDC
approved: H. Pfeffer / PDC
Document:
DB0010000EN
page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX
CLASSIC 100 cables are connecting- and control cables for flexible use and fixed installation for
medium mechanical use. They are for use in dry, damp and wet rooms. They may only be installed outdoors with
UV-protection and in observation of the temperature range. At room temperature they are generally resistant
against acids, caustics solutions and certain oils. ÖLFLEX
UV-protection and in observation of the temperature range. At room temperature they are generally resistant
against acids, caustics solutions and certain oils. ÖLFLEX
CLASSIC 100 cables are used as supply and flexible
connecting cable in machine tool manufacture, plant engineering, in power stations, in heating and air
conditioning installations, etc. Suitable for freely moved without forced guidance and tensile stress.
conditioning installations, etc. Suitable for freely moved without forced guidance and tensile stress.
Technical data
Conductor
bare copper, fine wire strand in accordance to IEC 60228
resp. VDE 0295, Class 5
Design
in accordance to HD 21.13S1 that is VDE 0281-13
Core insulation
LAPP special PVC-compound P 8/1, better than the PVC compound TI2 in
accordance to VDE 0207 part 4
Identification
with up to 5 cores are coloured-coded in acc. to HD 186 resp. VDE 0293
or HD308S2 that is VDE 0293-308; cables with more than 5 cores are colour-coded in
acc. to LAPP-ÖLFLEX colour-code.
Outer sheath
PVC-compound TM2 in acc. to VDE 0207 part 5 with increased requests
to LAPP specification
Nominal voltage
0,5 mm
2
to 1,5 mm
2
:
300 / 500 V
from 2,5 mm
2
:
450 / 750 V
from 2,5 mm
2
, fixed and protected installation:
600 / 1000 V
Test voltage
4000 V AC
Temp. range
for flexible use -5 up to +70° C max. conductor temperature
fixed installation -40 up to +80° C max. conductor temperature
Min. bending radius
flex. use : 15 x cable diameter
fixed installation: 4 x cable diameter
Flame retardant
in acc. to IEC 60332-1-2 resp. VDE 0482-332-2-1
Tests
in acc. to IEC 60811 resp. VDE 0473 and VDE 0472
EC directive
This cable is conform to ECD 2006/95/EC (Low Voltage Directive).