StarTech.com 4 Drive 3.5in Trayless Hot Swap SATA Mobile Rack Backplane HSB430SATBK User Manual
Product codes
HSB430SATBK
4 Drive 3.5in Trayless Hot Swap SATA Mobile Rack Backplane
StarTech ID: HSB430SATBK
This 4 Bay SATA Mobile Rack lets you swap between 3.5in Serial ATA (SATA, SATA II, SATA III-6Gbps) hard
drives in seconds.
drives in seconds.
A time saving storage solution, the mobile rack offers four trayless SATA hard drive bays, allowing you to hot
swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for
replacement.
swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for
replacement.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane
supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
Supporting up to four hard drives, the mobile SATA hot swap rack only takes up three 5.25in drive bays inside a
host computer - maximizing space-efficiency within the computer. The mobile rack/backplane is fully compatible
with RAID installations to ensure maximum performance and versatility for enhanced storage applications.
host computer - maximizing space-efficiency within the computer. The mobile rack/backplane is fully compatible
with RAID installations to ensure maximum performance and versatility for enhanced storage applications.
Using Terabyte hard drives? Don’t expose your Hard Drive and valuable data to unnecessary heat!
The HSB430SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of
typical drive operation. This feature is especially important for larger volume storage drives, and faster “spinning"
drives (i.e 7200 RPM), as it can help optimize drive operability and in turn preserve stored data integrity.
The HSB430SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of
typical drive operation. This feature is especially important for larger volume storage drives, and faster “spinning"
drives (i.e 7200 RPM), as it can help optimize drive operability and in turn preserve stored data integrity.
Applications
Add additional hot-swap bays to a server or workstation computer
Replace or upgrade old IDE backplane with a SATA backplane
System builders who need to image many drives simultaneously and quickly
Environments where drives need to be replaced/removed regularly, without external protection for the
drives required after removal
Be able to replace/remove individual drives from a storage array with minimal or no system down time
Replace or upgrade old IDE backplane with a SATA backplane
System builders who need to image many drives simultaneously and quickly
Environments where drives need to be replaced/removed regularly, without external protection for the
drives required after removal
Be able to replace/remove individual drives from a storage array with minimal or no system down time
www.startech.com
1 800 265 1844
1 800 265 1844