TP-LINK PoE Splitter TL-POE10R Data Sheet
Product codes
TL-POE10R
www.tp-link.com
Description：
Features：
Complies with IEEE802.3af standard
Advanced Auto-Sensing Algorithm
enables taking power from 802.3af PSE
enables taking power from 802.3af PSE
Cost Saving, no power cabling for Ethernet
network device
network device
Adjustable 5VDC，9VDC or 12VDC output
with slide switch
with slide switch
Supplies up to10W at 5VDC,9W at 9VDC or
12W at 12VDC
12W at 12VDC
High Safety with Short Circuit Protection
Supports power detection and
classification
classification
Auto disconnection for over voltage, under
voltage or over current
voltage or over current
Plug & Play installation, requires no configuration
TP-LINK’s PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard. It can receive power and data
from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as TP-LINK's
TL-SG3424P, TL-SF1008P, TL-POE150S or other equivalent products, then split electric power and data into
two cables, so you can install the non-PoE devices like Wireless Access Points, IP Cameras or IP Phones, in
remote location where there are no power lines or outlets, where you wish to fix these devices.
from all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Injector, such as TP-LINK's
TL-SG3424P, TL-SF1008P, TL-POE150S or other equivalent products, then split electric power and data into
two cables, so you can install the non-PoE devices like Wireless Access Points, IP Cameras or IP Phones, in
remote location where there are no power lines or outlets, where you wish to fix these devices.
TL-POE10R
PoE Splitter