TP-LINK AV500 TL-WPA4226KIT User Manual

Product codes
TL-WPA4226KIT
Page of 28
 TL-PA4020P 
AV500 2-port Powerline Adapter with AC Pass Through
 
14
 
 
¾
  MAC Address: Displays the MAC address of the powerline adapter connected to the current 
computer where this management utility is running. 
¾
  Network Name: Displays the network name of the current network or you can give a name for the 
network in which the powerline adapter is. By default, the network name is HomeplugAV. 
¾
  Use Default (HomePlugAV): Check the box before this item to use the default network name. 
¾
  Apply: Click the Apply button to make the setting effective. 
¾
  Password: Displays the password of the current powerline adapter. Every powerline adapter has its 
own password by default, which can be also found on the back of the adapter.   
¾
  Firmware: Displays the current firmware version used by the adapter. 
¾
  Refresh: Click the Refresh button to update the information. 
4.1.1 Set Local Device’s Network Name 
To set the local device’s network name, please take the following steps: 
(1) Click Status tab to display the Status tab window. 
(2)  Enter a name for the current network using 4~23 characters. Or you can check the Use Default 
(HomePlugAV) to use the default name as the network name. By default, the network name is 
HomeplugAV. 
(3) Click the Apply button to make the settings take effect. 
4.2 Network 
The Network tab window shows information of all the powerline adapters found on the current logical 
network. Furthermore, here you can change the Name of the listed powerline adapters as well as add 
another device to the current network.