Ubiquiti UNIFI ACCESSPOINT 3ER PACK UAP-LR-3 User Manual
Product codes
UAP-LR-3
39
Chapter 11: User/Guest Details
UniFi AP/AP-LR User Guide
Ubiquiti Networks, Inc.
Chapter 11: User/Guest Details
The User and Guest hyperlinks bring up the User/Guest
Details window. There are four clickable tabs at the top of
the window and two buttons located on the bottom of the
window. The buttons are accessible from any of the tabs
and perform the following actions:
Details window. There are four clickable tabs at the top of
the window and two buttons located on the bottom of the
window. The buttons are accessible from any of the tabs
and perform the following actions:
Block
Allows you to block the selected user from
accessing the network.
Reconnect
Allows you to reconnect a user that has been
blocked previously.
Unauthorize
(Available for guests only.) Allows you
to remove authorization of wireless guest access and
disconnect the client.
The 4 tabs contain the following information:
disconnect the client.
The 4 tabs contain the following information:
Details
Overview
MAC address
Displays the MAC address of the user or
guest.
Hostname
Displays the name (if defined).
IP address
Displays the IP address of the Access Point.
Uptime
Displays the amount of time the Access Point has
been running without interruption.
Connected AP
Displays the name or MAC address of the
Access Point this user is connected to.
Statistics
ESSID
Displays the wireless network name (SSID) of the
network that the user is connected to.
Connected AP
Displays the MAC address or name of the
Access Point the user is connected to.
Channel
Displays the channel being used for wireless
communication.
Signal
Displays the signal level.
TX Rate
Displays the transmit rate.
RX Rate
Displays the reception rate.
Activity
Displays user activity.
Power Save
Indicates whether power saving is enabled.
Received Pkts / Bytes
Displays the number of packets
and total bytes transmitted by the user.
Sent Pkts / Bytes
Displays the number of packets and
total bytes received by the user.
Note:
The Statistics tab will only appear when the
User/Guest is connected.