Ubiquiti UNIFI ACCESSPOINT 3ER PACK UAP-LR-3 User Manual
Product codes
UAP-LR-3
2
Chapter 1: Product Overview
UniFi AP/AP-LR User Guide
Ubiquiti Networks, Inc.
Front
LED
Indicates the status of the device. See
the table below for details.
LED Color
Status
Flashing Amber
Initializing.
Steady Amber
Factory default, waiting to be integrated.
Alternating
Amber/Green
Amber/Green
Device is busy; do not touch or unplug it.
This usually indicates a process such as a
firmware upgrade is taking place.
This usually indicates a process such as a
firmware upgrade is taking place.
Quickly Flashing
Green
Green
This is used to locate an AP.
When you click Locate in the UniFi
Controller software, the AP will flash. It will
also display the location of the AP on the
map.
When you click Locate in the UniFi
Controller software, the AP will flash. It will
also display the location of the AP on the
map.
Steady Green
Indicates the device has been successfully
integrated into a network and is working
properly.
integrated into a network and is working
properly.
Steady Green
with occasional
flashing
with occasional
flashing
Indicates the device is in an isolated state
(all WLANs are brought down until an
uplink is found).
(all WLANs are brought down until an
uplink is found).
Back
Ethernet Port
Connects to the 24V PoE
Adapter to provide power to the unit.
Reset Button
The reset button serves two functions:
•
Restart
It will restart the device when you press
and release it quickly.
•
Restore Factory Defaults
When you press and
hold it for more then five seconds, it will restore the
device to the factory default settings.
device to the factory default settings.