Ubiquiti UNIFI ACCESSPOINT 3ER PACK UAP-LR-3 User Manual

Product codes
UAP-LR-3
Page of 57
49
Appendix D: Safety Notices
UniFi AP/AP-LR User Guide
 Ubiquiti Networks, Inc.
Appendix D: Safety Notices
1.  Read, follow, and keep these instructions.
2.  Heed all warnings.
3.  Only use attachments/accessories specified by the 
manufacturer.
WARNING:
 Do not use this product in location that 
can be submerged by water. 
WARNING:
 Avoid using this product during an 
electrical storm. There may be a remote risk of 
electric shock from lightning. 
Electrical Safety Information
1.  Compliance is required with respect to voltage, 
frequency, and current requirements indicated on the 
manufacturer’s label. Connection to a different power 
source than those specified may result in improper 
operation, damage to the equipment or pose a fire 
hazard if the limitations are not followed.
2.  There are no operator serviceable parts inside this 
equipment. Service should be provided only by a 
qualified service technician.
3.  This equipment is provided with a detachable power 
cord which has an integral safety ground wire intended 
for connection to a grounded safety outlet.
a.  Do not substitute the power cord with one that 
is not the provided approved type. Never use an 
adapter plug to connect to a 2-wire outlet as this 
will defeat the continuity of the grounding wire. 
b.  The equipment requires the use of the ground wire 
as a part of the safety certification, modification or 
misuse can provide a shock hazard that can result in 
serious injury or death.
c.  Contact a qualified electrician or the manufacturer 
if there are questions about the installation prior to 
connecting the equipment.
d.  Protective earthing is provided by Listed AC 
adapter. Building installation shall provide 
appropriate short-circuit backup protection.
e.  Protective bonding must be installed in accordance 
with local national wiring rules and regulations.