TP-LINK AV500 TL-WPA4230P KIT Leaflet
Product codes
TL-WPA4230P KIT
Quick Installation Guide
Method 1: Plug and Play
Create a New Wireless Network
AV500 Passthrough Powerline WiFi Extender/WiFi Kit
Power
On: The device is on.
Off: The device is off.
Blinking: The device is pairing.
7106504801 REV1.0.0
Powerline
On: The device is connected to a powerline network.
Off: The device isn’t connected to any powerline network.
Blinking: The device is transferring data.
1.
Write down the default wireless network name
(SSID) and password of TL-WPA4230P.
* The default SSID is TP-LINK_XXXXXX. (XXXXXX indicates the last six unique
characters of the WLAN MAC address.)
characters of the WLAN MAC address.)
Wireless Network
Name (SSID)*:
Name (SSID)*:
TP-LINK_XXXXXX
Wireless Password:
XXXXXXXX
Installation is completed when all the
Powerline LEDs turn solid.
Powerline LEDs turn solid.
Ethernet
On: At least one Ethernet port is connected.
Off: No Ethernet port is connected.
Wi-Fi
Off: The wireless function is disabled.
Blinking quickly: The wireless function is enabled.
Blinking every second: The device is cloning Wi-Fi settings from
a router.
a router.
A powerline network requires at least two powerline
devices. We use the powerline adapter TL-PA4020P as an
example to work with TL-WPA4230P.
devices. We use the powerline adapter TL-PA4020P as an
example to work with TL-WPA4230P.
Note
If your home or office already has powerline adapters,
remove them first, install TL-WPA4230P using Method 1
or Method 2, and then add your existing adapters to the
powerline network.
If your home or office already has powerline adapters,
remove them first, install TL-WPA4230P using Method 1
or Method 2, and then add your existing adapters to the
powerline network.
1. Make sure the additional devices use factory default settings. If not,
please reset them.
2. Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid.
please reset them.
2. Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid.
If the Powerline LEDs do not turn solid, please follow the instructions in
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
Read this to install additional devices
LED Indicators
Ethernet
Ports
Ports
Reset
Button
Button
Pair
Button
Button
Wi-Fi/Wi-Fi Clone
Button
Button
TL-PA4020P
Additional
Device
Device
TL-WPA4230P
All the Powerline LEDs will turn
solid within 1 minute.
solid within 1 minute.
2.
Connect your devices as follows.
SSID:
TP-LINK_XXXXXX
TL-WPA4230P
If the Powerline LEDs don’t turn solid, reset all the powerline devices, or create
a powerline network by referring to FAQ-Q1.
a powerline network by referring to FAQ-Q1.
Enjoy!
Use the default
SSID
(TP-LINK_XXXXXX)
and
password you wrote down
to access the Internet.
to access the Internet.
LAN
WAN
TL-PA4020P
SSID:
ABCDE
Internet
500Mbps