TP-LINK AV500 TL-WPA4230P KIT User Manual

 

2

 

Please read this User Guide carefully before installing and using the equipment. The operating distance 
or range of your wireless connection varies significantly based on the physical placement of the 
powerline extender. Factors that can weaken signals by getting in the way of your network’s radio waves 
are metal appliances or obstructions, and walls. Typical ranges vary based on the types of materials and 
background RF (radio frequency) noise in your home or office. 

For best performance of your wireless network, you are suggested to place your powerline extender: 

1).  Near the center of the area in which your wireless stations will operate.   

2).  In an elevated location such as a high shelf.   

3).  Away from the potential sources of interference, such as PCs, microwaves, and cordless phones.   
4).  Away from large metal surfaces. 

Failure to follow these guidelines can result in significant performance degradation or inability to 
wirelessly connect to the powerline extender. 



Take notes that this AV500 Passthrough Powerline WiFi Extender works in pairs or with another 
powerline device. You need to plug the powerline extender into a power outlet; you will also need 
another powerline extender or powerline Ethernet adapter connected to your Cable/xDSL broadband 
(Ethernet port) in order to extend your broadband connection or Internet surfing. With clean powerline, 
the distance between two powerline Ethernet extenders can reach 300 meters, but the actual distance 
may vary due to the environment.   

Section below describes the AV500 Passthrough Powerline WiFi Extender’s LED indicators, physical 
interface and hardware connection mechanism.