TP-LINK TL-WR1043ND TL-WR1043ND(DE) User Manual

 

-42- 

poor network performance since excessive packets. 2346 is the default setting and is 

recommended.  



 

DTIM Interval - This value determines the interval of the Delivery Traffic Indication 

Message (DTIM). A DTIM field is a countdown field informing clients of the next window 

for listening to broadcast and multicast messages. When the router has buffered 

broadcast or multicast messages for associated clients, it sends the next DTIM with a 

DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The 

default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.   



 

Enable WMM - WMM function can guarantee the packets with high- priority messages 

being transmitted preferentially. It is strongly recommended enabled.   



 

Enable Short GI - This function is recommended for it will increase the data capacity by 

reducing the guard interval time

.  



 

Enabled AP Isolation - This function can isolate wireless stations on your network from 

each other. Wireless devices will be able to communicate with the router but not with 

each other. To use this function, check this box. AP Isolation is disabled by default.

 



If you are not familiar with the setting items in this page, it's strongly recommended to keep 

the provided default values; otherwise it may result in lower wireless network performance. 

Choose menu “Wireless→Wireless Statistics”, and then you can see the MAC Address, Current 

Status, Received Packets and Sent Packets for each connected wireless station. 

 

Figure 4-25 The router attached wireless stations 



 

MAC Address - The connected wireless station's MAC address 



 

Current Status  - The connected wireless station's running status, one of 

Disconnected 

 



 

Received Packets - Packets received by the station