TP-LINK AV500 TL-PA4030 User Manual

 

5

 

On 

At least one Ethernet port is connected, but there is no 
data being transferred. 

Blinking  At least one Ethernet port is transferring data. 

 Ethernet LED 

Off 

No Ethernet port is connected. 

 

There are three types of physical interfaces on this Powerline Adapter.   

 

Ethernet Port 

Three 10/100Mbps Ethernet ports for connecting the adapter to the PC or 
the broadband device with a network cable. 

Power Plug* 

A Power Plug for connecting the adapter to a power socket (100–240V~). 

Pair Button 

Pair button is used to secure a powerline network. To secure your network, 
please follow the steps below. Firstly, plug in a new adapter, and press its 
pair button for 1 second; then plug in another adapter and press its pair 
button for 1 second as well. The two buttons should be pressed within 2 
minutes of each other. After that, wait about 60 seconds so that the two 
adapters can finish connecting.   

*

 The provided power plug may differ from the picture due to different regional power 

specifications. Here we take the EU version of this product as an example.

)

1.  If the pair button is pressed till all the LEDs turn off (about 10 seconds), the Powerline Adapter 

will leave the network which it is associated with and its network name assumes a random 
value. The Power LED turns off when it disconnects from the Powerline network. 

2.  For detailed information about the Pair button, please refer to 

   

Power Plug

Ethernet Port 

Pair Button