Neutrik BNC connector Plug, straight 75 Ω NBNC 75 BFG 7 1 pc(s) NBNC75BFG7 Information Guide
Product codes
NBNC75BFG7
Document: NWP01, Version 1.0
5/8
MEASUREMENTS
5 Return
Loss
5.1 Measurement
Setup
Figure 3
5.2 Measurement
Conditions
Return loss measurement has been carried out with Neutrik NBNC75BTU11 75 Ω BNC connectors.
To compare the results of the Neutrik connectors, we have chosen the BNC connectors of a European
manufacturer (Standard series & HD optimized series), whose products are widely spread in broad-
cast applications across Europe, as reference.
All tested cable assemblies have been terminated with 20 m of the well-known Belden 1694A 75 Ω
coax cable.
a) Single cable (length 20m) with both ends terminated for connector evaluation
SMPTE 424M
To compare the results of the Neutrik connectors, we have chosen the BNC connectors of a European
manufacturer (Standard series & HD optimized series), whose products are widely spread in broad-
cast applications across Europe, as reference.
All tested cable assemblies have been terminated with 20 m of the well-known Belden 1694A 75 Ω
coax cable.
a) Single cable (length 20m) with both ends terminated for connector evaluation
SMPTE 424M
3
specifies a return loss of better than 10 dB between 1.485 GHz and 3 GHz and better
than 15 dB from 5 MHz to 1.485 GHz (values below SMPTE limits are indicated red in Figure 4).
All test specimens were sweep tested up to 4.5 GHz.
All test specimens were sweep tested up to 4.5 GHz.
5.3 Measurement
Results
Figure 4
DUT