Neutrik BNC connector Plug, straight 75 Ω NBLC 75 BSX 14 1 pc(s) NBLC75BSX14 Information Guide
Product codes
NBLC75BSX14
71
B
A
B
A
SCDR
NDO
SCDX
O p t i c a l C o n
®
W i r i n g a n d h o o k u p s u g g e s t i o n
In order to achieve uniform and compatible systems we recommend to follow the hook up suggestions of the ISO / IEC
11801 which defines channel A (right) as input and B (left) as output.
11801 which defines channel A (right) as input and B (left) as output.
Extract of the ISO / IEC 11801
Patch cord termination configuration
Patch cord termination configuration
It is recommended that connection of patch cords and equipment cords to the duplex adapter be made by means of a
duplex connector assembly.
duplex connector assembly.
Optical fibre patch cords, whether they are used for cross-connection or interconnection to equipment, shall be of a cross-
over orientation such that Position A goes to Position B on one optical fibre, and Position B goes to Position A on the other
optical fibre of the optical fibre pair (Figure 17). Each end of the optical fibre patch cord shall be identified to indicate
Position A and Position B if the connector can be separated into its simplex components. For alternate connector designs
utilising latches, the latch defines the positioning in the same manner as the keys.
over orientation such that Position A goes to Position B on one optical fibre, and Position B goes to Position A on the other
optical fibre of the optical fibre pair (Figure 17). Each end of the optical fibre patch cord shall be identified to indicate
Position A and Position B if the connector can be separated into its simplex components. For alternate connector designs
utilising latches, the latch defines the positioning in the same manner as the keys.
For simplex connectors, the connector that plugs into the receiver shall be considered Position A, and the connector that
plugs into the transmitter shall be considered Position B.
plugs into the transmitter shall be considered Position B.
Legend:
Figure 17 - Optical
= Connector
= Position "A"
= Position "B"
Note: Shading for clarification only
Field repair toolkit
NDO
Dummy plug for OpticalCon chassis connector
SCDR
Rear end protection cover for D-size chassis connectors
SCDX
Hinged cover seals D-size chassis connectors, IP42 rated
Field repair toolkit
find more details on www.neutrik.com
A c c e s s o r i e s
t i c C o n n e c t i o n S y s t e m
www.neutrik.com