Rigol MSO1074Z-S 4-channel oscilloscope, Digital Storage oscilloscope, MSO1074Z-S User Manual
Product codes
MSO1074Z-S
RIGOL
DS1000Z Quick Guide
11
oscilloscope is 100-240 V, 45-440 Hz. Use the power cord
provided with the accessories to connect the instrument to AC
power. Then, you can press the power key at the front panel
to start the instrument.
provided with the accessories to connect the instrument to AC
power. Then, you can press the power key at the front panel
to start the instrument.
Front Panel Function Overview
VERTICAL
CH1, CH2, CH3, CH4: analog input
channels. The 4 channels are marked by
different colors which are also used to mark
both the corresponding waveforms on the
screen and the channel input connectors.
Press any key to open the corresponding
channel menu and press again to turn off the
different colors which are also used to mark
both the corresponding waveforms on the
screen and the channel input connectors.
Press any key to open the corresponding
channel menu and press again to turn off the
channel.
MATH: press this key to open the math operation menu under
which add, subtract, multiply, divide, FFT, A&&B, A||B, A^B, !A,
intg, diff, sqrt, lg, ln, exp and abs are provided.
intg, diff, sqrt, lg, ln, exp and abs are provided.
REF: press this key to enable the reference waveform function to
compare the waveform actually tested with the reference
waveform.
waveform.
Source: press this key to enter the source setting interface. You
can turn on or off the outputs of the [Source1] and [Source2]
connectors at the rear panel, edit the output signal and view the
connectors at the rear panel, edit the output signal and view the