Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S User Manual
Product codes
DS2202A-S
RIGOL
DS2000A User’s Guide
14-4
nnn is from 0 to 223 (except 127) and the ranges of the other three nnn are
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use
to input the desired IP address. This setting will
be saved in the non-volatile memory and if
DHCP and Auto IP will be “Off” and the oscilloscope will load the preset IP
address automatically at the next power-on.
address automatically at the next power-on.
2. Set the Subnet Mask.
The format of the subnet mask is nnn.nnn.nnn.nnn; wherein, the range of the
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use
to input the desired subnet mask. This setting will be
DHCP and Auto IP will be “Off” and the oscilloscope will load the preset subnet
mask automatically at the next power-on.
mask automatically at the next power-on.
Set the Gate
You can set this paramter In Auto IP and Static IP mode.
The format of the gate is nnn.nnn.nnn.nnn; wherein, the range of the first nnn is
from 0 to 223 (except 127) and the ranges of the other three nnn are from 0 to 255.
You are recommended to ask your network administrator for a gate address
available.
Press Gate and use
to input the desired gate address. This setting will be saved
Auto IP will be “Off” and the oscilloscope will load the preset gate address
automatically at the next power-on.
automatically at the next power-on.