Lecroy WAVEACE 1012 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 1012 User Manual
Product codes
WaveAce 1012
WaveAce 1000/2000
WA1K2K-OM-E RevB
31
When the Attenuation switch is set to 1X, the probe limits the
bandwidth of the oscilloscope to 10MHz. To use the full
bandwidth of the oscilloscope, be sure to set the switch to 10X.
bandwidth of the oscilloscope to 10MHz. To use the full
bandwidth of the oscilloscope, be sure to set the switch to 10X.
Inverting Waveforms
Use the following steps to invert your waveform.
1. Invert the waveform by turning on the specific channel. Press the
desired channel button - CH1 or CH2 (or CH3 or 4 on 4 channel
models).
models).
2. Now, on the channel menu, press the Next Page option button,
showing page 2/3.
3. Press the Invert option button on page 2/3, and then select On.
Setting the Digital Filter
You can choose from the following digital filter types:
Low Pass Filter (LPF)
High Pass Filter (HPF)
Band Pass Filter (BPF)
Band Stop Filter
Use the following steps to set the digital filter.
1. Turn on the digital filter by pressing the desired channel button -
CH1 or CH2 (or CH3 or 4 on 4 channel models).
2. On the channel menu, press the Next Page option button, showing
page 2/3.