Rigol DS1074Z-S 4-channel oscilloscope, Digital Storage oscilloscope, DS1074Z-S Data Sheet

Product codes

DS1074Z-S

RIGOL

DS1000Z User’s Guide

6-13

Integrate

Calculate the integral of the specified signal source. For example, you can use
integrate to calculate the energy of a pulse or measure the area under a waveform.

Press MATH  Math  Operator to select “intg”:
  Press Display to turn on or off the integral operation function.
  Press Source to select the desired channels (CH1, CH2, CH3 or CH4).
  Press Offset and use

to adjust the vertical offset of the operation result.

 Press Scale and use

to adjust the vertical scale of the operation results.

 Press Scale Reset, the instrument will adjust the vertical scale to the best value

according to the current configration automatically.

 Press Options to set the start point, end point or turn on or off the inverted

display of the operation results.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Auto Scale to turn on or off the auto scale function. When “ON” is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.

 HORIZONTAL POSITION and HORIZONTAL SCALE can also be

used to adjust the horizontal position and scale of the operation results.

Differentiate

Calculate the derivative of the specified signal source. For example, you can use
differentiate to calculate the instantaneous slope of a waveform.

Press MATH  Math  Operator to select “diff”:
  Press Display to turn on or off the derivative operation function.
  Press Source to select the desired channels (CH1, CH2, CH3 or CH4).
  Press Offset and use