Testo 174H Mini Data Logger 0572 6560 User Manual

7 Maintaining the product 

 

 

31 

 

 

 

 

Only use new branded batteries. If a partially used battery 
is inserted, the calculation of the battery capacity is not 
performed correctly. 

 

6.

  Place battery compartment cover on the battery compartment 

and close by turning to the right. Use a coin for this. 

-  The current reading is shown on the display. 

 

 

The data logger must be reconfigured. To do so, the testo 
ComSoft software must be installed on the computer and a 
connection to the data logger must be set up (see 
Connecting data logger to PC page 26). 

 

7.

  Slide the data logger into the bracket of the interface. 

8.

  Start testo ComSoft software and create a connection to the 

data logger.  

9.

  Reconfigure data logger or install the old stored configuration, 

see separate testo ComSoft instruction manual. 

-  The data logger is once again ready for use. 

 

 

Damage to the sensor! 
>  Ensure that no liquid enters the inside of the housing. 

 

>  

If the housing of the instrument is dirty, clean it with a damp 
cloth.  

Do not use any aggressive cleaning agents or solvents! Weak 
household cleaning agents or soap suds can be used.