Greisinger EB 3000 Display, control and monitoring device EB 3000 - 603291 Data Sheet

E35.0.01.6C-03                     Manual for connection and operation of the EB 3000                          page 3 of 19

This device was designed and tested considering the Safety regulations for electronic measuring devices.
Faultless operation and reliability in operation of the measuring device can only be assured if the General
Safety Measures and the devices specific safety regulation mentioned in this users manual are considered.
1. Faultless operation and reliability in operation of the measuring device can only be assured if the device

is used within the climatic conditions specified in the chapter “Specifications“.

2. Always disconnect the device from its supply before opening it. Take care that nobody can touch any of

the unit‘s contacts after installing the device.

3. Standard regulations for operation and safety for electrical, light and heavy current equipment have to be

observed, with particular attention paid to the national safety regulations (e.g. VDE 0100).

4. When connecting the device to other devices (e.g. the PC) the interconnection has to be designed most

thoroughly, as internal connections in third-party devices (e.g. connection of ground with protective earth)
may lead to undesired voltage potentials.

5. The device must be switched off and must be marked against using again, in case of obvious malfunc-

tions of the device which are e.g.:
- visible damage
- no prescripted working of the device
- storing the device under inappropriate conditions for longer time
When not sure, the device should be sent to the manufacturer for repairing or servicing.

Attention: When running electric devices, parts of them will always be electrically live.
Unless the warnings are observed serious personal injuries or damage to property
may result. Skilled personnel only should be allowed to work with this device. For trou-
ble-free and safe operation of the device please ensure professional transport, stor-
age, installation and connection as well as proper operation and maintenance.

are persons familiar with installation, connection, commissioning and operation of the product and have pro-
fessional qualification relating to their job.

For example:

 • Training or instruction resp. qualifications to switch on or off, isolate, ground and mark electric circuits and

devices or systems.

 • Training or instruction according to the state.

 • First-aid training.