Entes MPR-63 Mains-analysis device, Mains analyser MPR-63 User Manual

29

In this menu, LCD display settings are configured. It has 3 sub-menus. 

“Loop: ...” ,   “Cont: ...” ,   “BL: ...”

Loop (Loop duration)

In this menu, the duration of displaying instantaneous value is adjusted automatically. The Loop duration can be

adjusted as “No” or between 1... 600 in terms of seconds.

For example; 

when the loop duration is set as 10sec. in the Instantaneous Values menu, if any button is not

pressed during 10 sec. the Instantaneous values are displayed in sequence for 10 seconds periods.

By using this function all instantaneous values can be observed sequentially without pressing any buttons.

This function can be cancelled by selecting “No” option in the Loop Menu.

Cont (Contrast - LCD Display Clarity Settings)

The value can be set between 1....6.

BL

(

Backlight

)

Measured values can easily be read on the LCD screen even in dark environments with feature of the backlight

function.

On

:

Backlight is On continuously.

Off

:

Backlight is Off continuously.

Auto :

Backlight is switched on automatically when a button is pressed. It is switched off automatically at

the end of 30 seconds if any button is not pressed again.

Figure 37:

Setting the contrast clarity

Figure 38:

Setting the contrast clarity

This menu is the last menu that is reached by pressing ESC button while in any menu.

Also it  is the main menu of device. If you wait a while without pressing any buttons

in any menu, the Instantaneous value menu automatically comes back.

When device is energized for the first time, the device is in the Instantaneous values

menu and shows the instantaneous values.

The display is  seen as below.

Figure 36:

Setting the loop duration

L1

L2

L3

Warning :

You may quit all settings any time by           key.

You must record any change in the settings by         menu key.

4.9   Display

4.10   INSTANTANEOUS VALUES