Gw Instek GPT-9801 Insulation measuring device, GPT-9801 User Manual
Product codes
GPT-9801
GPT-9000 Series User Manual
88
Delete a Test Step
1. Use the UP/DOWN and
LEFT/RIGHT arrow keys to move
the cursor to the test step you wish
to delete.
the cursor to the test step you wish
to delete.
2. Press the DEL soft-key.
D E L
3. The step will be deleted.
Save Changes
and Exit
and Exit
To save the changes made in Page
View, press the EDIT/SAVE key.
You will be returned back to
AUTO mode/VIEW status.
View, press the EDIT/SAVE key.
You will be returned back to
AUTO mode/VIEW status.
EDIT/SAVE
Cancel and Exit
Page View
Page View
To cancel any changes and to exit
the Page View, press the ESC key.
You will be returned back to
AUTO mode/VIEW status.
the Page View, press the ESC key.
You will be returned back to
AUTO mode/VIEW status.
ESC
Running an Automatic Test
Background
An automatic test can be run when the tester is
in VIEW status.
in VIEW status.
Note
The tester cannot start to run an AUTO test
under the following conditions:
under the following conditions:
Any protection modes have been tripped.
The INTERLOCK function is ON and the
Interlock key is not inserted in the signal I/O
port (page 102).
Interlock key is not inserted in the signal I/O
port (page 102).
The STOP signal has been received remotely.
If Double Action is ON, ensure the START