Beha Amprobe GT-800 PRO KITVDE-tester 4472081 User Manual
Product codes
4472081
GT-600/GT-800 Instruction Manual
45
In order to save displayed measurement results, press the “SAVE” function
key (F5) twice, for further instructions see the “Memorizing example”
section.
section.
During the AUTO Test procedure the following soft menu keys can be offered:
IGNR
Pressing the “IGNR” (Ignore) menu key the operator will ignore current
test result (for example, if it was carried out by mistake, or if it is out of
prescribed limit value).
Note! After pressing the “IGNR” menu key, previous worst result will be
displayed.
prescribed limit value).
Note! After pressing the “IGNR” menu key, previous worst result will be
displayed.
DEL
Pressing the “DEL” (Delete) menu key the operator will delete worst
result (for example, if current result was already ignored by pressing the “IGNR”
menu key).
Note! Be aware there will be no result available any more after pressing the
“DEL” menu key.
menu key).
Note! Be aware there will be no result available any more after pressing the
“DEL” menu key.
NEXT
Pressing the “NEXT” menu key the operator will move to the next test
(for example from R
PE
to R
ISO
test).
BACK
Pressing the “BACK” menu key the operator will move back to previous
test (for example from R
ISO
to R
PE
test).
END
Pressing the “END” menu key the operator will end the AUTO Test
procedure and move to “check” mode. After pressing the “END” menu key you
may check all sub-results (worst result in each function) by using the “
may check all sub-results (worst result in each function) by using the “
” and
“
” soft menu keys.