Chauvin Arnoux C.A 6030VDE-tester EN 61010 · EN 61557 · VDE 0413 P01191511 Data Sheet

40

  symbol :

WARNING !  Consult the user manual before using the instrument.
Failure to follow or carry out the instructions in this user manual that are preceded by this symbol
may result in personal injury or damage to the  instrument and the installations.

Thank you for purchasing a C.A 6030 Residual current device tester.

To get the best service from this instrument :

■

 read carefully this user's manual,

■

  respect the safety precautions

This instrument can be used on category III installations at voltages not exceeding 550V with
respect to earth. Category III meets the reliability and availability requirements of uses on fixed
industrial installations (cf. EN 61010-1 + A2).

■

Never use the C.A 6030 tester on installations having a potential greater than 550V with respect to
earth.

■

Check that none of the input terminals is connected and that the switch is set to OFF before
opening the instrument.

■

Use connection accessories of which the overvoltage category and service voltage are greater
than or equal to those of the measuring instrument (600V, cat. III). Use only accessories that
comply with safety standards (EN 61010-2-031 and EN 61010-2-032).

■

Do not immerse the C.A 6030 tester!

■

Repairs and metrological verifications must be carried out by approved, qualified personnel.

Unless otherwise stated, our warranty is valid for twelve months (12 months) following the date on
which the equipment is made available (extract from our General Conditions of Sale, available on
request).