Fluke 1652C07-TPOLEKITVDE-tester 4426040 User Manual

37 

You can store measurements on the tester: 

•

  1653B – up to 444 

•

  1654B – up to 1500 

The information stored for each measurement consists of the test function and 
all user selectable test conditions. 
Data for each measurement is assigned a data set number, data subset 
number, and a data id number. Memory location fields are used as described 
below. 

 Use the data set field (a) to indicate a location such as a 

room or electrical panel number. 

 

Use the data subset field (b) for circuit number. 

 

The data id number field (c) is the measurement number. 
The measurement number automatically increments. The 
measurement number can also be set to a previously used 
value to overwrite an existing measurement. 

1. Press 

the 

 to enter Memory mode.  

The display changes to a memory mode display. In Memory mode, the 
 icon appears on the display.  

1653B: The primary numeric display will be active with the left two digits 
(a) indicating the data set number (1-99) and the right two digits (b) 
indicating the data subset number. The decimal point separating these two 
values will be active. The secondary numeric display (c) will be active 
indicating the data id number (1-444). One of the memory locations, a, b, 
or c, will flash to indicate that you can change the number using the arrow 
keys . 
1654B: The primary numeric display shows the data set number (a, 
1-9999). The secondary numeric display shows the data subset number (b, 
1-9999). The data id number (c, 1-9999) appears after you press  
several times. One of the memory locations, a, b, or c, will flash to indicate 
that you can change the number using the arrow keys .