Testboy TV 455VDE-tester Testboy TV 455 User Manual
Product codes
Testboy TV 455
TESTBOY TV 450
Warnings and notes
7
2 Safety and operational considerations
2.1 Warnings and notes
In order to maintain the highest level of operator safety while carrying out various tests
and measurements, TESTBOY recommends keeping your TESTBOY instruments in
good condition and undamaged. When using the instrument, consider the following
general warnings:
The
symbol on the instrument means »Read the Instruction manual
with special care for safe operation«. The symbol requires an action!
If the test equipment is used in a manner not specified in this user manual,
the protection provided by the equipment could be impaired!
the protection provided by the equipment could be impaired!
Read this user manual carefully, otherwise the use of the instrument may
be dangerous for the operator, the instrument or for the equipment under
test!
be dangerous for the operator, the instrument or for the equipment under
test!
Do not use the instrument or any of the accessories if any damage is
noticed!
noticed!
If a fuse blows in the instrument, follow the instructions in this manual in
order to replace it!
order to replace it!
Consider all generally known precautions in order to avoid risk of electric
shock while dealing with hazardous voltages!
shock while dealing with hazardous voltages!
Do not use the instrument in supply systems with voltages higher than
550 V!
550 V!
Service intervention or adjustment is only allowed to be carried out by a
competent authorized personnel!
competent authorized personnel!
Use only standard or optional test accessories supplied by your
distributor!
distributor!
Consider that older accessories and some of the new optional test
accessories compatible with this instrument only meet CAT III / 300 V
overvoltage safety rating! This means that maximal allowed voltage
between test terminals and ground is 300 V!
accessories compatible with this instrument only meet CAT III / 300 V
overvoltage safety rating! This means that maximal allowed voltage
between test terminals and ground is 300 V!
The instrument comes supplied with rechargeable Ni-Cd or Ni-MH battery
cells. The cells should only be replaced with the same type as defined on
the battery compartment label or as described in this manual. Do not use
standard alkaline battery cells while the power supply adapter is
connected, otherwise they may explode!
cells. The cells should only be replaced with the same type as defined on
the battery compartment label or as described in this manual. Do not use
standard alkaline battery cells while the power supply adapter is
connected, otherwise they may explode!
Hazardous voltages exist inside the instrument. Disconnect all test leads,
remove the power supply cable and switch off the instrument before
remove the power supply cable and switch off the instrument before
All normal safety precautions must be taken in order to avoid risk of
electric shock while working on electrical installations!
electric shock while working on electrical installations!