Fluke 805 VIBRATION METER 4094385 User Manual
Product codes
4094385
805
Users Manual
Users Manual
8
Power On
Push O to turn on the Meter. See Table 3 for the control
location.
location.
Note
Before you use the Meter for the first time, install
the new batteries (see Battery Replacement on
page 38).
the new batteries (see Battery Replacement on
page 38).
When the Meter is turned on, the default Measurement
screen shows on the Meter.
screen shows on the Meter.
gqi49.bmp
Power Off
A soft shutdown is the preferred method to turn off the
Meter:
Meter:
1. Push
O.
2. At the prompt, select Yes.
3. Or,
select
No to continue with operation.
gqi50.bmp
If the Meter locks up or becomes inoperable, a hard
shutdown can be used to turn off the Meter:
shutdown can be used to turn off the Meter:
Note
Use a hard shutdown only as a last recourse as it
can cause data loss. After a hard shutdown, start
the Meter and verify the data in Memory.
1. Push and hold O for more than 2 seconds.
can cause data loss. After a hard shutdown, start
the Meter and verify the data in Memory.
1. Push and hold O for more than 2 seconds.
2. Push
O to restart the Meter.
If Meter does not restart or the problem persists,
contact Fluke.
contact Fluke.