Thermaltake A2018 Case Fan A2018 Leaflet
Product codes
A2018
www.thermaltake.com
REVISION A. 2003.11
In
s
ta
ll
a
ti
o
n
O
1
4
5
2
Step 1
mart Case
Fan Blue LED
S
Application for PC and CPU Fan
Full Speed :
Leave the jumper in it's original position and make
sure the speed control device is not connected (Photo 1).
sure the speed control device is not connected (Photo 1).
Temperature control function :
Temperature detector from 20¢X
C to 55¢X
C.
- Secure the sensor with the thermal tape included.
Note: 1. For K7 cooler, place the sensor underneath the processor.
You may bend the sensor for better fit (Photo 2).
2. For P4 & K8 cooler, we suggest to tape the sensor
underside of CPU heatsink (Photo 3).
- Remove the jumper and attach the temperature sensor
connector (Photo 4).
Note: 1. For K7 cooler, place the sensor underneath the processor.
You may bend the sensor for better fit (Photo 2).
2. For P4 & K8 cooler, we suggest to tape the sensor
underside of CPU heatsink (Photo 3).
- Remove the jumper and attach the temperature sensor
connector (Photo 4).
Manual speed control function :
- Remove the jumper and attach the speed control connector (Photo 5).
- Replace the fan speed controller to free PCI slot by
the screw included.
- Replace the fan speed controller to free PCI slot by
the screw included.
AI Function 1 :
AI Function 2 :
AI Function 3 :
> > >
>
>
>
Note :
- The direction of the airflow is as the arrow on the side of the fan.
- Avoid excessive pressure to the sensor !
Photo 3
Photo 2
> > >
Photo 1
Photo 4
Photo 5
>
>
>