U Reach CONRAD SATA-FESTPLATTEN-CLONER/ERASER PRO118 User Manual

• Never use the product immediately after it was taken from a cold into a warm

environment. The condensation generated may destroy the product. Moreover,
there is the risk of a fatal electric shock!
Let the product reach room temperature before connecting and using it. This may
take several hours.

• Only operate the product via the included mains adapter. Do not use any other

mains adapter for power supply.

• Do not pull the mains plug from the mains socket by pulling the cable.
• If the mains adapter or mains cable are damaged, do not touch it. Danger to life

from electric shock!
First power down the mains socket to which the mains adapter is connected (e.g.
switch off the respective fuse or turn out the fuse). Then switch off the associated
residual-current circuit-breaker so that the mains supply is disconnected from
mains voltage on all poles.
Only then unplug the mains adapter from the mains socket. Dispose of the
damaged mains cable or mains adapter in an environmentally compatible way.
Do not use it anymore.
Replace it with a new mains cable or mains adapter of the same specifications.

• Mains adapter setup corresponds to protective class I. Only a proper protective

contact mains socket must be used as voltage source.

• Do not leave packaging material unattended. It may become a dangerous toy for

children.

• Handle the product with care; impacts, shock or fall even from low heights will

damage it.