Philips Bluetooth stereo headset SHB4000 SHB4000/10 Data Sheet

Product codes
SHB4000/10
Page of 14
7
English
EN
4  Use the headset
Connect the headset to a 
mobile phone
Turn on your mobile phone. 
Press and hold 
 to turn the headset on. 
 
»
The blue LED flashes.
 
»
The headset is reconnected to the last 
connected device automatically. If the 
last one is not available, the headset 
tries to reconnect to the second last 
connected device.
Tip
 
If you turn on the mobile phone or its Bluetooth 
feature after turning on the headset, connect the 
headset from the Bluetooth menu on your mobile 
phone.
Automatic power saving
If the headset fails to connect any Bluetooth 
device within range in five minutes, it powers 
down automatically to save the battery life.
Use your headset
Task
Operation
Sound or LED 
Indicator
Turn the 
headset on.
Press and 
hold 
 for 
more than 1 
second
1 short beep
•  1 blue flash: 
Battery level 
> 50%
•  1 white flash: 
Battery level 
< 50%
Turn the 
headset off.
Press and 
hold 
 for 
more than 4 
seconds
•  1 long beep
•  1 long white 
flash
Play or pause 
music.
Press 
1 short beep
Pick up or 
terminate a 
call.
Press 
1 short beep
Reject a call.
Press and 
hold 
1 short beep
Redial the 
last number.
Press 
 
twice
1 short beep
Switch caller 
in a call.
Press 
 
twice
1 long beep
Adjust 
volume.
Press +/-
1 short beep
Skip forward. Press and 
hold +
1 short beep
Skip 
backward.
Press and 
hold -
1 short beep
Other status and indicators
Headset status
Indicator
The headset is connected 
to a Bluetooth device, while 
the headset is in standby 
mode or while you are 
listening to music.
Blue LED 
flashes every 6 
seconds.
The headset is ready for 
pairing.
LED flashes 
whiteand 
bluealternately.
The headset is on but not 
connected to a Bluetooth 
device.
Blue LED 
flashes fast.
There is an incoming call.
Blue LED 
flashes twice 
per second.
Low battery.
White LED 
flashes.
Battery is fully charged.
White LED is 
off.