Ctek Automatic charger Hochfrequenz-ladegerät 12V, 08/5,0 A MXS 5.0 CHECK User Manual

EN • 3

on the purchase of your new professional switch mode battery charger and tester. This 

charger and tester is included in a series of professional chargers from CTEK Sweden AB 

and represents the latest technology in battery charging and testing

1. Connect the charger to the battery. Lamp 4, 5 and 6 now start flickering indicating 

VOLTAGE TEST PROGRAM. Ignore this and continue with the next step. 

2. Connect the charger to the wall socket. The power lamp will indicate that the mains 

cable is connected to the wall socket. The error lamp will indicate if the battery clamps 

are incorrectly connected. The reverse polarity protection will ensure that the battery 

or charger will not be damaged.

3. Press the MODE-button (3) to select charging program. 

Continue to press the MODE-button to combine charging program with charging options.

Press the MODE-button several times until the desired combination of charging program 

and options are lit.

4. Follow the 8-step display through the charging process.  

The battery is ready to start the engine when STEP 4 is lit.  

The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket. 

VOLTAGE TEST PROGRAM