Becker professional.5 LMU 1501870000 User Manual

>>>

NAVIGATION MODE

You can orient the map for example in
the direction of travel.
If you have selected a 3D display for the
map view, the vertical display angle can
be adjusted, too.
> Press the 3D map view on the display

a little longer.

Apart from the pulsating point, a com-
pass and two arrow buttons

 and

pointing to the left and right appear on
the top edge of the screen, and on the left
edge of the screen, two arrow buttons
pointing up and down are displayed.
> Press the

 button.

The viewing angle will be lower and the
horizon is moved back after a while into
the image.
> Press the 

 button.

The viewing angle will be steeper. If the
angle is exactly 90°, you are viewing the
map in the 2D view from the top.

With the Route overview, you can have
Points of Interest (POIs) and, if the TMC
on route option is activated in the

menu, TMC events displayed on the
selected route.
> Press the 

 button.

A list of POIs and traffic events are
displayed. In the top edge of the screen,
four single buttons are displayed for TMC
announcements on the route and the
three selected POI Categories are also
displayed. Apart from the symbols, the

number of TMC announcements and
POIs are displayed.
> Press one or more buttons to display

TMC events or POIs.

A list of POIs and, if applicable, TMC
events is displayed with the expected
arrival time and distance from the
current vehicle position.
> Press the desired Point of Interest or

TMC event.

Information such as the address and the
telephone number of the POIs or the type
of traffic obstruction are displayed. From
this view, all actions already described in
the chapter Points of Interest on page 52
can be accessed, such as displaying POIs
on the map, inserting or storing
stopovers on routes.