AEG AR 4020 400400 User Manual

67

Remove sleeve (D) and frame (B) from the unit. Use 

 

‹

installation keys (C), if necessary.

Place the sleeve in the ISO slot.

 

‹

Bend the claws outward with a screwdriver for perfect 

 

‹

fit.

Check the sleeve for tight fit.

 

‹

Connect the ISO female connectors of the unit with 

 

‹

the two ISO male connectors of the vehicle.

Connect the antenna to the antenna connector at the 

 

‹

rear of the unit.

Secure the unit against theft, if necessary. Attach bolt 

 

‹

and mounting strip with the fastening materials at the 

firewall.

Carefully slide the unit into the sleeve until it locks 

 

‹

into place.

Press 

 

‹

RESET (25) with a pen or other pointed object 

after all connections are made.

Attach the front panel (A) as described under “Attach 

 

‹

Front Panel”.

 

To avoid cable damage observe the cables when slid-

 

►

ing the unit into the sleeve.

Attach the frame.

 

‹

Follow these instructions to remove the unit:

 

‹

Remove the frame. 

 

‹

Insert left and right installation keys in the slots left 

 

‹

and right (the claws are now bent back).

Slide the unit out of the sleeve.

 

‹

 

Unevenness of the casing can cause the claws to 

 

►

lock. Unlock the claws with the installation keys, if 

necessary.

 

Sleeve, frame and mounting strip are not needed.

 

►

Use the threads on the side of the casing (A) to mount the 

unit on the vehicle bracket (supplied with your car). The 

holes are marked with T (for Toyota) and N (for Nissan).

A

B

C

D

B

Loosen the mounting screws for the hooks left and 

 

‹

right at the front of the unit and remove the hooks.

Mount the brackets (B) with screws on the unit (D).

 

‹

Connect line out of the external audio device to 

 

‹

IN (12) jack on the front panel.

Select playback mode for external device by repeatedly 

 

‹

pressing 

MODE (22) until AUX is displayed.