Sangean DCR-10 DCR10SW Data Sheet
Product codes
DCR10SW
29
Scan sensitivity setting – FM
Your radio will normally scan for FM broadcasts which are
strong enough to give good reception. However, you may wish
the Auto-scan function to also be able to find weaker signals,
possible from more distant radio transmitters. Your radio includes
a local / distant option for the Auto-scan function.
strong enough to give good reception. However, you may wish
the Auto-scan function to also be able to find weaker signals,
possible from more distant radio transmitters. Your radio includes
a local / distant option for the Auto-scan function.
1. Press the Standby/Sleep button to switch on your radio.
2. If needed, press the Source button to select the Source button
to select the FM band.
to select the FM band.
3. Press and hold the Tuning control so that “TIME SET” appears
on the display.
on the display.
4. Rotate the Tuning control until the display shows “SCAN ZON”
on the lower line. Press the Select button to enter the scan
zone setting.
on the lower line. Press the Select button to enter the scan
zone setting.
5. Rotate the Tuning control to switch between Local and Distant
options on the lower line of the display. The Distant option will
allow the radio to find weaker signals when scanning.
options on the lower line of the display. The Distant option will
allow the radio to find weaker signals when scanning.
6. Press the Select button to confirm your selection. The radio will
then revert to the normal display. The Local or Distant setting is
stored in the radio and remains in force until changed or until a
System Reset.
then revert to the normal display. The Local or Distant setting is
stored in the radio and remains in force until changed or until a
System Reset.
2
3-5
4,6