ZyXEL MC100FX-SC2-A 91-010-142001B Leaflet

mc100fx-
sc series

ł

Converts Speed and

 Media 

Types

ł

Extends Network Span for

  up to 2 km/30 km

ł

Easy Installation

ł

Transparent to 802.1Q VLAN  

 

 Packets

ł

Link Fault Signaling (LFS)    

 

  Notifies Down Link to Peers

ł

Multiple Configurations via  

 

  DIP Switch Setting

The MC100FX-SC Series equips with one 100FX fiber port and one 10/100TX copper port for speed and 

media conversion. Featuring with SC type connector, the 100FX fiber port can extend network span for 

up to 30 km.

ł

The built-in SC type connector and single-mode fiber transceiver module are capable of extending 

network span for up to 30 km.

ł

The built-in SC type connector and multi-mode fiber transceiver module built-in are capable of 

extending network for span up to 2 km.

The MC100FX-SC Series media converter can identify and retain 802.1Q VLAN packets to ensure that 

Virtual LANs (VLANs) operation across the media converter.

With Auto-negotiation, the 10/100TX copper port can synchronize transmission speed and mode with 

peer devices. In addition, Auto-crossover on 10/100TX copper port eliminates circuit mismatch problem 

by auto-sensing the MDI/MDIX function; both features make installation easier to complete. Meanwhile, 

multiple configurations can be done via DIP switches to give users more management capability for 

better control over the devices.

With the Link Fault Signaling (LFS) mechanism, one failed link detected on the 10/100 copper port will 

force to stop a link on the fiber port, and vice versa. The copper downlink port will stop transmitting and 

turned off as soon as the remote link is failed, and the Spanning Tree Protocol (STP) of the connected 

switch will start functioning as a result to activate the backup link that secure the network operation. 

Transparent link status is delivered by LFS mechanism to make network recovery and troubleshooting 

easier and faster.