Ansmann Mains charger Ladegerät ALCT 2-24 9164015-510 Leaflet
Product codes
9164015-510
Use of the charger
Charger for sealed lead acid batteries 2 V up to 24 V with the capacity range from 2.4 Ah to 24
Ah.
Features
- For charging sealed lead acid batteries: 2V, 6V, 12V or 24 V
Charger for sealed lead acid batteries 2 V up to 24 V with the capacity range from 2.4 Ah to 24
Ah.
Features
- For charging sealed lead acid batteries: 2V, 6V, 12V or 24 V
- For all types of sealed lead acid batteries
- Protection against overload and short circuit by current limitation
- Protection against wrong polarity by polyswitch
- Charging with IU-curve
- Suitable for float charging
- Trickle charge approx 20mA
Display
LED red on: charging of the battery
LED red off: end of charging / trickle charging
LED green: after connecting the battery one of the 4 green LED´s indicates the voltage of the
connected battery. If no battery is connected the LED for 24 V will light.
Attention
Only for charging rechargeable lead acid batteries. Do not charge other types of batteries -
Danger of explosion!
Commissioning
Plug the charger into a convenient mains socket. If no battery is connected the green LED for 24
V will light. Connect the battery with the battery clips. The red LED indicates charging. After
charging the red charging LED switches off and the battery is provided with trickle charging. The
battery is now fully charged and ready for use.
Warning
When charging lead acid cells, explosive gases can develop. Avoid open fire and sparks.
Tip
Do not carry out any cleaning if the charger is plugged in. Only use a dry cloth to clean the
charger. Do not use the charger if the housing is damaged. Chargers that require repair must be
sent to authorised service agents or dealers.
Caution
Keep your charger in a dry place (indoor use only). Never try to open the charger. Danger of fire
and electric shock!
Specification
Voltage of the battery end of charging voltage charging current
2
- Protection against overload and short circuit by current limitation
- Protection against wrong polarity by polyswitch
- Charging with IU-curve
- Suitable for float charging
- Trickle charge approx 20mA
Display
LED red on: charging of the battery
LED red off: end of charging / trickle charging
LED green: after connecting the battery one of the 4 green LED´s indicates the voltage of the
connected battery. If no battery is connected the LED for 24 V will light.
Attention
Only for charging rechargeable lead acid batteries. Do not charge other types of batteries -
Danger of explosion!
Commissioning
Plug the charger into a convenient mains socket. If no battery is connected the green LED for 24
V will light. Connect the battery with the battery clips. The red LED indicates charging. After
charging the red charging LED switches off and the battery is provided with trickle charging. The
battery is now fully charged and ready for use.
Warning
When charging lead acid cells, explosive gases can develop. Avoid open fire and sparks.
Tip
Do not carry out any cleaning if the charger is plugged in. Only use a dry cloth to clean the
charger. Do not use the charger if the housing is damaged. Chargers that require repair must be
sent to authorised service agents or dealers.
Caution
Keep your charger in a dry place (indoor use only). Never try to open the charger. Danger of fire
and electric shock!
Specification
Voltage of the battery end of charging voltage charging current
2
V
2.3
V
900
mA
6
V
6.9
V
700
mA
12
V
13.8
V
600
mA
24
V
27.6
V
300
mA