3com 4210 PWR 9-Port 3CR17341-91-ME User Manual

Product codes

3CR17341-91-ME

Link Aggregation Configuration Example

115

Network diagram

Figure 38 Network diagram for link aggregation configuration

Configuration procedure

The following example only lists the configuration required on Switch A; you must
perform the same configuration proceedure on Switch B to implement link
aggregation.

1 Adopting manual aggregation mode

# Create manual aggregation group 1.

<4210> system-view

[4210] link-aggregation group 1 mode manual

# Add Ethernet1/0/1 through Ethernet1/0/3 to aggregation group 1.

[[4210] interface Ethernet1/0/1

[4210-Ethernet1/0/1] port link-aggregation group 1

[4210-Ethernet1/0/1] quit

[4210] interface Ethernet1/0/2

[4210-Ethernet1/0/2] port link-aggregation group 1

[4210-Ethernet1/0/2] quit

[4210] interface Ethernet1/0/3

[4210-Ethernet1/0/3] port link-aggregation group 1

2 Adopting static LACP aggregation mode

# Create static aggregation group 1.

<4210> system-view

[4210] link-aggregation group 1 mode static