3com 4210 PWR 9-Port 3CR17341-91-ME User Manual
Product codes
3CR17341-91-ME
Logging in through Telnet
43
When the authentication mode is password, the command level available to users
logging into the user interface is determined by the user privilege level
command.
logging into the user interface is determined by the user privilege level
command.
Configuration Example
Network requirements
The current user logs in through the Console port and the user level is set to the
administrator level (level 3). Perform the following configuration for users logging
into VTY 0 using Telnet.
administrator level (level 3). Perform the following configuration for users logging
into VTY 0 using Telnet.
1 Authenticate users using the local password.
2 Set the local password to 123456 (in plain text).
■
Commands of level 2 are available to the users.
■
Telnet protocol is supported.
■
The screen can contain up to 30 lines.
■
The history command buffer can contain up to 20 commands.
■
The timeout time of VTY 0 is 6 minutes.
Network diagram
Figure 10 Network diagram for Telnet configuration (with the authentication mode being
password)
password)
Configuration procedure
# Enter system view.
<4210> system-view
Set the timeout time of the
user interface
user interface
idle-timeout minutes [ seconds ]
Optional
The default timeout time
of a user interface is 10
minutes.
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if
no operation is
performed in the user
interface within 10
minutes.
being 10 minutes, the
connection to a user
interface is terminated if
no operation is
performed in the user
interface within 10
minutes.
You can use the
idle-timeout 0
command to disable the
timeout function.
idle-timeout 0
command to disable the
timeout function.
Table 21 Telnet configuration with the authentication mode being password
Operation Command
Description
RS-232 port
Configuration cable
Console port