3com 4210 PWR 9-Port 3CR17341-91-ME User Manual
Product codes
3CR17341-91-ME
460
C
HAPTER
40: I
NFORMATION
C
ENTER
and enable debugging for corresponding modules through the debugging
command.
command.
Enabling system information display on a monitor terminal
After setting to output system information to a monitor terminal, you need to
enable the associated display function in order to display the output information
on the monitor terminal.
enable the associated display function in order to display the output information
on the monitor terminal.
n
Make sure that the debugging/log/trap information terminal display function is
enabled (use the terminal monitor command) before you enable the
corresponding terminal display function by using the terminal debugging,
terminal logging, or terminal trapping command.
enabled (use the terminal monitor command) before you enable the
corresponding terminal display function by using the terminal debugging,
terminal logging, or terminal trapping command.
Setting to Output
System Information to a
Log Host
Table 348 Enable the display of system information on a monitor terminal
Operation
Command
Description
Enable the
debugging/log/trap
information terminal display
function
debugging/log/trap
information terminal display
function
terminal monitor
Optional
Enabled by default
Enable debugging
information terminal display
function
information terminal display
function
terminal debugging
Optional
Disabled by default
Enable log information
terminal display function
terminal display function
terminal logging
Optional
Enabled by default
Enable trap information
terminal display function
terminal display function
terminal trapping
Optional
Enabled by default
Table 349 Set to output system information to a log host
Operation
Command
Description
Enter system view
system-view
-
Enable the information center info-center enable
Optional
Enabled by default.
Enable system information
output to a log host
output to a log host
info-center loghost
host-ip-addr [ channel {
channel-number |
channel-name } | facility
local-number ]*
host-ip-addr [ channel {
channel-number |
channel-name } | facility
local-number ]*
Required
By default, the switch does
not output information to the
log host.
not output information to the
log host.
After you configure the switch
to output information to the
log host, the switch uses
information channel 2 by
default.
to output information to the
log host, the switch uses
information channel 2 by
default.
Configure the source
interface through which log
information is sent to the log
host
interface through which log
information is sent to the log
host
info-center loghost source
interface-type
interface-number
interface-type
interface-number
Optional
By default, no source interface
is configured, and the system
automatically selects an
interface as the source
interface.
is configured, and the system
automatically selects an
interface as the source
interface.