Hsb Industrieelektronik ISOLATION TRANSDUCER 230 VAD BTR-16 16.011.02.000 Leaflet
Product codes
16.011.02.000
Isolation and Measuring transducers
BTR
BTR
serie 22,5mm
DIP swich adjustments
In
Out
0-10 V
0-10 V
2-10 V
2-10 V
0-20mA
0-20mA
4-20mA
4-20mA
APPLICATION
For the conversion of a standard electrical signal into another
standard signal or / andelecric isolation.
standard signal or / andelecric isolation.
DESCRIPTION
The BTR isolation transducer uses the terminals A1 and A2 for
connection to 24V AC/DC (UC) or 230V AC (please specify).
The green LED indicates the connection to the power supply,
which must be continuously connected to the transducer.
connection to 24V AC/DC (UC) or 230V AC (please specify).
The green LED indicates the connection to the power supply,
which must be continuously connected to the transducer.
FUNCTION
The BTR transducer acquires a standard signal 0(4) ... 20mA
or 0(2) ... 10V DC and converts it into an independent current
or voltage signal. The measuring circuit is electrically isolated
from the power supply. The desired configuration is selected
with the DIP switches on the relay´s front panel. The BTR
isolation transformer has three-way isolation.
or 0(2) ... 10V DC and converts it into an independent current
or voltage signal. The measuring circuit is electrically isolated
from the power supply. The desired configuration is selected
with the DIP switches on the relay´s front panel. The BTR
isolation transformer has three-way isolation.
OPTION
Other supply voltages or input, output signals upon request.
MOUNTING
Snap-on mounting using a standard DIN rail EN 50022. The
unit is designed to allow side-by-side mounting, with an
ambient temperatur of < 60°C.
unit is designed to allow side-by-side mounting, with an
ambient temperatur of < 60°C.
APPROVALS
ARTIKELNUMMER
16.011.01.000
BTR 24V UC Versorgung
16.011.02.000
BTR 230V AC Versorgung
16.011.03.000
BTR 110V AC Versorgung
TECHNICAL DATA
Supply
power supply :
power supply :
24V AC/DC +/-15
frequency range :
50 ... 60 / 0Hz
power consumption :
2VA
operating mode :
continuous
isolation voltage :
1kV DC
Input/Output
measuring accuracy :
measuring accuracy :
0,5% over the entire
temperatur and voltage range
temperatur and voltage range
input :
0 ( 4 ) ... 20mA DC
@ 237 Ohm
0 ( 2 ) ... 10V DC
@ 20kOhm
@ 237 Ohm
0 ( 2 ) ... 10V DC
@ 20kOhm
overload capability :
100% constant, 500% for 1s
output :
0 ( 4 ) ... 20mA
@ max. 750 Ohm
0 ( 2 ) ... 10V
@ min. 1kOhm
@ max. 750 Ohm
0 ( 2 ) ... 10V
@ min. 1kOhm
correction time :
< 0,7 s
isolation voltage I/O :
3,75kV
Operation indicator :
LED, green
General data
ambient temperatur :
ambient temperatur :
0 ... + 60°C
climatic resistance :
VDE 0435T.2021
mounting position :
any
vibration resistance :
VDE 0435T.2021
test voltage :
2,5kV
connection terminals :
screws M3,5
connecton cross selection :
2 x 2,5mm²
mounting :
symetrical DIN rail
DIN EN 50022
DIN EN 50022
dimensions l x w x h :
78mm x 11,25mm x 110mm
weight :
71g
Info@hsb-electronics.de
www.hsb-electronics.de
www.hsb-electronics.de
HSB Industrieelektronik
Hans-Boerdlein-Str.10
97723 Reith / Germany
Hans-Boerdlein-Str.10
97723 Reith / Germany
Tel.: +49 9736 / 75759-0
Fax: +49 9736 / 75759-20
Fax: +49 9736 / 75759-20