Zettler Electronics AZ881-2A-12DEA Subminiature PCB Mount Power Relay 12Vdc 2 NO, DPST-NO AZ881-2A-12DEA Data Sheet
Product codes
AZ881-2A-12DEA
COIL
Power
At Pickup Voltage
192 mW (monostable, 2 coil latching)
(typical)
96 mW (1 coil latching)
Max. Continuous
0.75 W at 20°C (68°F) ambient
Dissipation
Temperature Rise
30°C (54°F) at nominal coil voltage
Max. Temperature
130°C (266°F) Class B, 155°C (311°F) Class F
CONTACTS
Arrangement
SPST (1 Form A), DPST (2 Form A)
DPST (1 Form A and 1 Form B)
DPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 150 W or 2000 VA (SPST)
150 W or 1250 VA (DPST)
Max. switched current:
8 A (SPST)
5 A (DPST)
5 A (DPST)
Max. switched voltage: 150 VDC or 380 VAC*
*
Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Please contact the factory.
Rated Load
SPST
UL, CUR
8 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
DPST
5 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
5 A at 250 VAC resistive, 100k cycles
5 A at 30 VDC resistive, 100k cycles
1/6 HP at 250 VAC
Material
Silver nickel, gold plating optional
Resistance
< 50 milliohms initially
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 8 A 250 VAC resistive (SPST)
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Reset Time (typical)
4 ms at nominal coil voltage
Recommended coil pulse: 20 ms
Dielectric Strength
4000 Vrms contact to coil
(at sea level)
1000 Vrms between open contacts
2000 Vrms between contact sets
2000 Vrms between contact sets
Insulation Resistance
1000 megohms min. at 20°C
500 Vdc 50% RH
500 Vdc 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 130°C (266°F)
Vibration
0.078” DA at 10 to 55 Hz
Shock
20 g functional
100 g destructive
100 g destructive
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5 grams
Packing unit in pcs
50 per plastic tube / 2000 per carton box
AZ881
8 A SPST / 5 A DPST POLARIZED
SUBMINIATURE POWER RELAY
MONOSTABLE OR LATCHING
SUBMINIATURE POWER RELAY
MONOSTABLE OR LATCHING
FEATURES
• Dielectric strength 4000 Vrms
• Single and dual coil latching versions available
• Epoxy sealed version available
• 8 Amp switching
• Class F (155°C) insulation available
• UL, CUR file E44211
• Single and dual coil latching versions available
• Epoxy sealed version available
• 8 Amp switching
• Class F (155°C) insulation available
• UL, CUR file E44211
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is recom-
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is recom-
mended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
ZETTLER
electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com
0
97
800
89
+49
Tel.
Germany
Puchheim,
D-82178
Junkersstrasse 3,
2007-01-25