Zettler Electronics AZ767-1A-6DE Subminiature PCB Mount Power Relay 6Vdc 1 NO, SPST-NO AZ767-1A-6DE Data Sheet
Product codes
AZ767-1A-6DE
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 5 A 250 VAC Res.
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
5 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
1000 megohms min. at 20°C
Resistance
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F) standard
-40°C (-40°F) to 85°C (185°F) sensitive
-40°C (-40°F) to 85°C (185°F) sensitive
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–50 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
6 grams
Packing unit in pcs
50 per plastic tray / 500 per carton box
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
SPDT (1 Form C)
Ratings
Resistive Load:
SPST-NO
Standard coil
Standard coil
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 ADC or 10 AAC
Max. switched current: 5 ADC or 10 AAC
Sensitive coil
Max. switched power:
90 W or 750 VA
Max. switched current: 3 A
SPDT
Max. switched power:
90 W or 750 VA
Max. switched current: 3 A
Max. switched voltage: 150 VDC* or 380 VAC
*
Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory
Please contact the factory
Rated Load
UL, CUR
Form A
Standard coil
10 A at 125 VAC, Res., 30k cycles
5 A at 30 VDC / 250 VAC, 100k cycles
10 A LRA / 1.5 A FLA at 120 VAC, 100k cycles
5 A at 30 VDC / 250 VAC, 100k cycles
10 A LRA / 1.5 A FLA at 120 VAC, 100k cycles
1
/
10
HP at 125 VAC, 100k cycles
1
/
6
HP at 250 VAC, 100k cycles
Sensitive coil
5 A at 125 VAC, Res., 100k cycles
3 A at 30 VDC / 250 VAC, 100k cycles
3 A at 30 VDC / 250 VAC, 100k cycles
Form C
3 A at 30 VDC / 250 VAC, 100k cycles
3 A at 30 VDC / 250 VAC, 100k cycles
Material
Silver cadmium oxide
Resistance
< 100 milliohms initially
ZETTLER
electronics GmbH
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com
0
97
800
89
+49
Tel.
Germany
Puchheim,
D-82178
Junkersstrasse 3,
2005-03-08
AZ767
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
253 mW standard coil
(typical)
113 mW sensitive coil
Max. Continuous
1.25 W at 20°C (68°F) ambient
Dissipation
Temperature Rise
41°C (74°F) standard coil
(at nominal voltage)
22°C (40°F) sensitive coil
Temperature
Max. 130°C (266°F)
SPDT SUBMINIATURE
POWER RELAY
POWER RELAY
FEATURES
• Low cost
• 10 Amp switching
• Epoxy sealed version available
• UL, CUR file E44211
• 10 Amp switching
• Epoxy sealed version available
• UL, CUR file E44211