Zettler Electronics AZ822-2C-12DE PCB Mount Relay 2 CO, DPDT AZ822-2C-12DE Data Sheet
Product codes
AZ822-2C-12DE
AZ822
3/3/04W
SUBMINIATURE
DIP RELAY
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• Life expectancy to 10 million operations
• Standard PC 0.1" grid terminal spacing
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
• DC coils to 48 VDC
• Life expectancy to 10 million operations
• Standard PC 0.1" grid terminal spacing
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
CONTACTS
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC or 250 VAC
UL Rating: 1 A at 24 VDC
Max. switched current: 2 A
Max. switched voltage: 220 VDC or 250 VAC
UL Rating: 1 A at 24 VDC
0.5 A at 120 VAC
Material
Silver palladium, gold clad
Resistance
< 50 milliohms initially
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
8
Electrical
5 x 10
5
at 1 A 30 VDC
Operate Time (typical)
5 ms at nominal coil voltage
Release Time (typical)
2 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Capacitance (max.)
Contact to contact: 1.2 pF
Contact set to contact set: 1.6 pF
Contact to coil: 1.5 pF
Contact set to contact set: 1.6 pF
Contact to coil: 1.5 pF
Bounce
At 10 mA contact current
(typical)
2 ms at operate N.O. side
3 ms at operate N.C. side
3 ms at operate N.C. side
Dielectric Strength
1000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms contact to contact
1000 Vrms between contact sets
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-55°C (-67°F) to 90°C (194°F)
Storage
-55°C (-67°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
20 g
Enclosure
P.B.T. polyester (UL94 V-0)
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
4.5 grams
COIL
Power
At Pickup Voltage
98 mW - Standard coils
(typical)
74 mW - Sensitive coils
Max. Continuous
0.94 W at 20°C (68°F)
Dissipation
Temperature Rise
15°C (27°F) at nominal coil voltage
Temperature
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.