Panasonic AGQ2104H PCB Mount Relay 4.5Vdc 2 CO, DPDT AGQ2104H Data Sheet
Product codes
AGQ2104H
GQ (AGQ)
1
ds_61008_0000_en_gq: 061006J
SPECIFICATIONS
ULTRA-SMALL PACKAGE
FLAT POLARIZED RELAY
GQ RELAYS (AGQ)
TESTING
7.200.3
.283.012
10.600.3
.417.012
5.200.2
.205.008
mm
inch
10.600.3
.417.012
Max.5.40
.213
7.200.3
.283.012
FEATURES
• Compact flat body saves space
With a small footprint of 10.6 mm (L)
With a small footprint of 10.6 mm (L)
×
7.2 mm (W)
.417 inch (L)
×
.283 inch (W)
for space savings, it also has a very short
height of 5.2 mm
height of 5.2 mm
.205 inch
. (Standard PC
board type.)
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10
×160 μs (FCC part 68)
Surge withstand between contacts and
coil: 2,500 V 2
coil: 2,500 V 2
×10 μs (Telcordia)
• The use of twin crossbar contacts
ensures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating
volatile gas from coil.
ensures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating
volatile gas from coil.
• Increased packaging density
Due to highly efficient magnetic circuit
design, leakage flux is reduced and
changes in electrical characteristics from
components being mounted close-
together are minimized. This all means a
packaging density higher than ever
before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock
resistance.
Functional shock resistance:
750 m/s
Due to highly efficient magnetic circuit
design, leakage flux is reduced and
changes in electrical characteristics from
components being mounted close-
together are minimized. This all means a
packaging density higher than ever
before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock
resistance.
Functional shock resistance:
750 m/s
2
{75G}
Destructive shock resistance:
1,000 m/s
1,000 m/s
2
{100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm
10 to 55 Hz (at double amplitude of 3.3
mm
.130 inch
)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
10 to 55 Hz (at double amplitude of 5 mm
.197 inch
)
Contact
Remarks:
* Specifications will vary with foreign standards certification ratings.
*
*
1
Measurement at same location as "Initial breakdown voltage" section.
*
2
Detection current: 10mA.
*
3
Nominal voltage applied to the coil, excluding contact bounce time.
*
4
By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
1 A.
*
5
Half-wave pulse of sine wave: 6 ms;detection time: 10
μs.
*
6
Half-wave pulse of sine wave: 6 ms.
*
7
Detection time: 10
μs.
*
8
Refer to 6. Conditions for operation, transport and storage mentioned in
Characteristics
Notes:
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
actual load.
#2 The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70
temperature range is from –40 to +70
°C
–40
° to +158°F
.
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A )
(By voltage drop 6 V DC 1A )
100 m
Ω
Contact material
Stationary: AgPd+Au clad
Movable: AgPd
Rating
Nominal switching capacity
(resistive load)
(resistive load)
1 A 30 V DC
0.3 A 125 V AC
Max. switching power
(resistive load)
(resistive load)
30 W, 37.5 V A
Max. switching voltage
110 V DC, 125 V AC
Max. switching current
1 A
Min. switching capacity
(Reference value)
(Reference value)
#1
10
μA 10 mV DC
Nominal
operating
power
operating
power
Single side stable
140mW (1.5 to 12 V DC)
230mW (24 V DC)
1 coil latching
100mW (1.5 to 12 V DC)
120mW (24 V DC)
Expected
life (min.
operations)
life (min.
operations)
Mechanical (at 180 cpm)
5
× 10
7
Electrical
(at 20 cpm)
(at 20 cpm)
1 A 30 V DC
resistive
resistive
10
5
0.3 A 125 V
AC resistive
AC resistive
10
5
Initial insulation resistance*
1
Min. 1,000M
Ω (at 500V DC)
Initial
breakdown
voltage*
breakdown
voltage*
2
Between open contacts
750 Vrms for 1min.
Between contact sets
1,000 Vrms for 1min.
Between contacts and coil
1,500 Vrms for 1min.
Initial surge
voltage
voltage
Between open contacts
(10
(10
×160 μs)
1,500 V(FCC Part 68)
Between contacts and coil
(2
(2
×10 μs)
2,500 V(Telcordia)
Operate time [Set time]*
3
(at 20
°C)
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode)
[Reset time]*
[Reset time]*
3
(at 20
°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Temperature rise*
4
(at 20
°C)
Max. 50
°C
Shock resistance
Functional*
5
Min. 750 m/s
2
{75G]
Destructive*
6
Min. 1,000 m/s
2
{100G]
Vibration resistance
Functional*
7
10 to 55 Hz at double
amplitude of 3.3 mm
Destructive
10 to 55 Hz at double
amplitude of 5 mm
Conditions for
operation, transport
and storage*
operation, transport
and storage*
8
(Not freezing and
condensing at low
temperature)
condensing at low
temperature)
Ambient
temperature
temperature
#2
–40
°C to 85°C
–40
°F to 185°F
Humidity
5 to 85% R.H.
Unit weight
Approx. 1 g
.035 oz