IMC Networks iMcV-T1/E1 J1 TP SSFiber-SM1550-SC 850-14291 Leaflet

iMcV-T1/E1/J1 products are physical layer devices that convert twisted pair to fiber
optics and operate at a switch-selectable protocol rate of T1 (1.544), E1 (2.048)
and the Japanese J1 (1.544).  iMcV-T1/E1/J1 products offer more fiber choices and
distances because they are engineered to the industry standard 8B/10B PHY
encoding. 

Available with remote management via the fiber port, the SNMP-manageable
iMcV-T1/E1/J1 products enable network managers to conduct loopback testing,
and monitor and manage units located up to 100 km away at a remote location.  

Full bit rate for customer traffic
Since IMC Networks’ management technology functions transparently to the
frame format, customers will not experience overhead or loss of a data channel
typically associated with remote management or SNMP polling.  Customer traffic
will always be full bit rate: 1.544 Mbps or 2.048 Mbps.

• A line integrity test feature
• Three modes of operation for loopback testing (local, remote and analog

loopback) 

• The Transmit Data Source diagnostic feature which sends specific patterns of

data (transmit all unframed ones; transmit a pattern of zeros, and ones and
transmit a Pseudorandom Bit Sequence [PRBS]) to determine problems with
the cable. 

Configure all test modes remotely via iView² SNMP software or locally by manu-
ally setting DIP switches on the units.  In addition, iMcV-T1/E1/J1 also includes an
internal elastic buffer to remove jitter from transmitted data.

iMcV-T1/E1/J1 media converters allow users to link two PBXs, CSUs or routers and
extend the distance between the two over fiber. 

•

Operates at T1 (1.544), 

E1 (2.048) and J1 (1.544) protocols

•

Conduct loopback tests, 

•

Monitor/manage units via GUI-Based

iView²

•

Full bit rate for customer traffic 

•

Up and running in less than five min-

utes

•

Easily adjust settings when user

requirements change

•

Easy upgrades; no user intervention

or visits to remote locations required

•

Monitor and control all connections

•

Available for multi-mode or single-

mode fiber

•

Single-strand fiber versions

•

Supports very long fiber distances

•

Three loopback testing modes, plus

SNMP management and LEDs assist
in diagnosing problems on fiber optic
networks